User manual PHILIPS 32PFL4508

[. . . ] 5 Automatic installation 5 Manual installation 6 Give name 6 Reshuffle the programme list 6 Select Favourite TV channels 6 TV Setup . 10 Picture menu 10 Active Control 11 Sound 11 Ambilight 12 Features menu 13 Dual screen / PIP / Multipip . 15 Switch Teletext on and off 15 Select a Teletext page 15 Previously selected teletext page 15 Select the index teletext page 15 Select subpages 15 Picture/Teletext 15 Enlarge a Teletext page 15 Hypertext 15 Teletext menu . 17 Recorder (vcr-dvd+rw) 17 Recorder and other A/V devices 17 DVD Player or other accessory digital source devices 18 Multi channel Surround receiver 18 HDMI (High Definition Multimedia Interface) connector 19 Connect extra subwoofer 19 Side connections 20 To select connected peripherals 20 Record with your recorder . [. . . ] Notes: - Dual X is only available with dual sound transmission. - Mono/Stereo is only selectable in case of analogue stereo transmission. - Digital/Analogue is only selectable in case of Digital transmission. 11 Ambilight Ambilight TV Ambilight Brightness Mode (Colour) (Palette) (Saturation) Ambilight is an innovative lighting concept using light with fully adjustable colours at the back of the TV to enhance the viewing experience. Analysis of the picture content adapts the colours continuously, or the lights can be set to any fixed colour and many shades of white. Ambilight creates the ideal viewing environment for your TV resulting in improved relaxed viewing, improved perceived picture detail, contrast and colour. In standby mode the lights can be set/operated to any colour and create a unique ambiance in the room. & Select Ambilight in the TV menu. é Press the cursor down to enter the Ambilight menu. " Select Ambilight and press the cursor right to select Off or On. Press the i key to get information about the selected menu item. Colour modes: · Personal: Select any Colour or hue to match to your personal taste, e. g. your interior, the program content (sports, movie, etc. ), the mood you are in, etc. · Warm white:The Colour is matched to that of most normal lightbulbs. Select this setting if you want the Ambilight to fit best with normal living room lighting. - The selected Colour mode will be the one used when turning on the ambient lights from standby. Ambilight in Standby mode When the TV is switched off, the ambient lights will also be switched off. When the TV is in standby mode, ambilight can be used to provide a unique ambience for the room. Press the ambilight on/off key on the remote control to switch between Ambilight Off or On. Infrared interference on external devices To avoid bad remote control reception, place your external devices out of sight of the ambient lights of your TV set. Note: Ambilight does not function well when the room temperature is less than 15°C. 12 Features menu Features TV Channel list Subtitle Sleeptimer Child lock On timer Off On On during mute & Press the cursor right to select Features. é Select the menu items with the cursor up/down and adjust the settings with the cursor left/right. Channel list Press the OK key to switch over to the selected TV channel or external. Select subtitles The subtitle page must be stored for each TV channel: Switch on teletext and select the proper subtitle page from the index. Subtitle On will automatically display them on the selected TV channels if subtitles are in the transmission. A symbol will indicate that the mode is on. [. . . ] Sometimes you can improve the picture quality by changing the direction of the aerial. · Is the picture or teletext unrecognisable?Check if you have entered the correct frequency. See Installation, Manual installation, p. [. . . ]