User manual PHILIPS 32PW4523-79R

[. . . ] Colour television 32PW4523 Operating instruction Introduction Thank you for your confidence in Philips TV. This handbook has been designed to help you install and operate your TV set with ease. We would strongly recommend that you read through it thoroughly. without thorough inspection for parts and that accessories that may be packed separately inside the carton. [. . . ] · Contrast +: automatic adjustment of the the picture contrast which permanently sets the darkest part of the picture black. · Store: to store the picture adjustments and settings (as well as the settings for and N R in the Feat es menu). ur Co nt st + ra Sound adjustments Press , select Sound ( ) and press The Sound menu is displayed: M ai nge ¥ Pi ur ct e Sound ¥ Feat es ur ¥ I all nst . Sound Tr e ebl ¥ B ass ¥ B al ance ¥ AVL ¥ I . Surr ncr ound ¥ U lra B ass t ----- 56 I --- keys to select a setting and Use the the keys to adjust. Once the adjustments have been made, select Store and press to store these changes. To quit the menus, press . Description of the settings: · Treble: this alters the high frequency sounds. · Bass: this alters the high frequency sounds. · Balance: this balances the sound on the left and right speakers. · AVL (Automatic Volume Leveller): this is used to limit increases in sound, especially on channel change or advertising slots. · Incredible Surround: this boost the effect of stereo sound. · Ultra Bass: this is used to enhanced bass output. Feature settings Press , select Feat es ( ur You can adjust: ) and press . Description of the adjustments: · Rotation: large screen TVs are sensitive to terrestrial magnetic field variations. This setting is used to compensate for this by adlusting the picture rotation. Select the option On and it will appear each time you switch to a new channel. Press , use the key to select Features and press the key. The Features menu is displayed: Use the key to select Signal Strength and press the key to select On. Press to exit. Mainge ¥ Pctur i e ¥ Sound Featur es ¥ I all nst Featur es · R ot i aton ¥ For at m Si gnalStr engt h ¥ Actve C ontr i ol ----- 5 I --- Active Control This feature displays the signal strength level at the bottom of the screen. Select the option On and it will appear each time you switch to a new channel. Press , use the key to select Features and press the key. The Features menu is displayed: Use the key to select Signal Strength and press the key to select On. Press to exit. Mainge ¥ Pctur i e ¥ Sound Featur es ¥ I all nst Featur es · R ot i aton ¥ For at m Si gnalStr engt h ¥ Actve C ontr i ol ----- 5 I --- Personal Zapping A list or series of favourite TV programs can be selected and stored in the 4 coloured keys with the Personal Zapping feature. With this feature you can easily viewed up to a total of 10 preferred channels for each coloured key. To add channels: Select a channel with the digit keys. [. . . ] Peripheral equipment gives a black and white picture You have not selected the right socket with the 4 key: S-VHS2 (S-VHS3) instead of EXT2 (EXT3). To play a video cassette, check that it has been recorded under the same standard (PAL, SECAM, NTSC) which can be replayed by the video recorder. Check that the mode selector on the side of the remote control is set to TV. No sound If on certain channels you receive a picture but no sound, this means that you do not have the correct TV system. Teletext Are certain characters not displayed correctly? [. . . ]