User manual PHILIPS 32PW6006-79R

[. . . ] TV IMPORTANT Information for users in the UK (not applicable outside the UK) Positioning the TV For the best results, choose a position where light does not fall directly on the screen, and at some distance away from radiators or other sources of heat. Leave a space of at least 5 cm all around the TV for ventilation, making sure that curtains, cupboards etc. cannot obstruct the air flow through the ventilation apertures. The TV is intended for use in a domestic environment only and should never be operated or stored in excessively hot or humid atmospheres. [. . . ] The Sound menu is displayed: Mainge · Picture $ Sound · Features · Install Sound · Treble · Bass · Balance · Delta Volume · AVL · Store -----I--- 56 é Use the îÏ keys to select a setting and the Ȭ keys to adjust. " Once the adjustments have been made, select Store and press ¬ to store these changes. ` To quit the menus, press d. Description of the settings: · Treble: this alters the high frequency sounds. · Bass: this alters the low frequency sounds. · Balance: this balances the sound on the left and right speakers. · Delta Volume*: this is used to compensate any volume discrepancies between the different programs or EXT sockets. This setting is available for programs 0 to 40 and the EXT sockets. · AVL* (Automatic Volume Leveller): this is used to limit increases in sound, especially on program change or advertising slots. · Store: this is used to store the sound settings. * Only available on certain versions. Feature settings & Press H, select Features (Ï) and press ¬. You can adjust: é Timer, Child Lock and Parental Cont. : see next page " Contrast +: automatic adjustment of the picture contrast which permanently sets the darkest part of the picture to black. ` NR: attenuates picture noise (snow) in difficult reception conditions. Caution: to store the Contrast + and NR settings, use the Store choice in the Picture menu. ( Rotation (only available on very large screen sets): large screen sets are sensitive to terrestrial magnetic field variations. This setting is used to compensate for this by adjusting the picture rotation. § To quit the menus, press d. 6 Timer function (only available on certain versions) This menu lets you use the TV set as an alarm. é With the cursor, select the Features menu then Timer : " Sleep: to select an automatic standby period. Mainge · Picture · Sound $ Features · Install Timer · Sleep $ Time Start Time Stop Time Program No. Activate 10:56 · · · · This setting is also available via the ` key on the remote control. Note: the time is updated automatically each time the TV set is switched on via the teletext information on programme 1. If this program does not have teletext, the update will not take place. ( Start Time: enter the start time. § Stop Time: enter the standby time. è Program No. : enter the number of the programme for the wake-up alarm. For models equipped with a radio, you can select an FM station by using the Ȭ keys (the 09 keys are only used to select TV programs). Activate: the settings include: · Once for a single alarm, · Daily for each day, · Stop to cancel. [. . . ] Peripheral equipment gives a black and white picture You have not selected the right socket with the n key: S-VHS2 (S-VHS3) instead of EXT2 (EXT3). To play a video cassette, check that it has been recorded under the same standard (PAL, SECAM, NTSC) which can be replayed by the video recorder. Check that the mode selector on the side of the remote control is set to TV. No sound If on certain channels you receive a picture but no sound, this means that you do not have the correct TV system. Teletext Are certain characters not displayed correctly? [. . . ]