User manual PHILIPS 32PW6315

[. . . ] Introduction Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. We hope our technology meets entirely with your satisfaction. Table of Contents Installation Installing your television set . [. . . ] This mode is only available when surround loudspeakers are connected to the TV set. . 3D Surround (optimal with Dolby Surround source) This mode enables you to experience the effect of Dolby Pro Logic without the need of having rear speakers connected or activated. The sound is reproduced on the left, right and centre loudspeakers giving the impression of a rear surround effect. Dolby Pro Logic * (with Dolby Surround sound source) The left, right, centre and rear speakers reproduce the Dolby Pro Logic sound. This mode is used when a film or programme has been recorded or encoded in Dolby Surround sound. These films or programmes are always indicated by the symbol : £ DOLBY SURROUND. The DOLBY PRO LOGIC mode is only available when surround loudspeakers are connected to the TV set. This mode is not recommended for mono transmissions (only the central channel is used). "Dolby" and the double-D symbol £ are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation. 9 Timer function This menu allows you to use your TV as an alarm clock. é Select FEATURES (J) and press L twice. The TIMER menu appears : · PICTURE · SOUND · FEATURES · INSTALL FEATURES TIMER · TIME · START TIME · STOP TIME · PROG; NO; · ACTIVATE 10:56 " Press L to enter and exit the sub-menus and use keys IJ to adjust: ` TIME: enter current time. Note: the time is updated automatically each time the set is switched on using teletext information taken from programme 1. If programme 1 does not have teletext, the update will not take place. è PROG; NO;: enter the number of the programme required. ACTIVATE: you can set the alarm to be activated: · ONCE ONLY for a one-off alarm, · DAILY for a daily alarm or · STOP to cancel. ç Press R to set the TV to standby. It will automatically switch on at the time programmed. If you leave the TV switched on, it will only change programme at the time indicated. The combination of the CHILD LOCK and TIMER functions may be used to limit the length of time your television is in use, for example, by your children. Locking the set You can bar access to certain programmes or completely lock the set by locking the keys. Locking programmes & Press H. é Select FEATURES (J) and press L. (J) and press L. · PICTURE · SOUND · FEATURES · INSTALL FEATURES · TIMER · CHILD LOCK · PARENTAL CONT · ROTATION ACCES CODE ---- ` Enter your confidential access code. The first time, enter the code 0711 then confirm by re-entering 0711. The menu appears. § Use keys IJ to select the required programme and confirm with L. The symbol + is displayed alongside the programmes or sockets that have been locked. To watch a programme which has been locked you will now need to enter the confidential code; otherwise the screen will remain blank. Caution: in the case of encrypted programmes which use an external decoder, it is necessary to lock the corresponding EXT socket. To unlock all programmes Repeat stages & to ` above, then select CLEAR ALL and press L. To change the confidential code Repeat stages & to ` above, then: ( Select CHANGE CODE and enter your own 4-digit number. è Press R to exit from the menus. [. . . ] The TV set does not react to the remote control; the indicator on the set no longer flashes when you use the remote control?Standby When you switch the TV set on it remains in standby mode and the indication LOCKED is displayed when you use the keys on the TV set?The CHILD LOCK function is switched on (p. If the set receives no signal for 15 mins, it automatically goes into standby mode. [. . . ]