User manual PHILIPS 32PW6515

[. . . ] Introduction Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. We hope our technology meets entirely with your satisfaction. Table of Contents Installation Installing your television set . [. . . ] The TIMER menu appears : · · · · PICTURE SOUND FEATURES INSTALL FEATURES TIMER · TIME · START TIME · STOP TIME · PROG; NO; · ACTIVATE 10:56 " Press L to enter and exit the sub-menus and use keys IJ to adjust: ` TIME: enter current time. Note: the time is updated automatically each time the set is switched on using teletext information taken from programme 1. If programme 1 does not have teletext, the update will not take place. è PROG; NO;: enter the number of the programme required. ACTIVATE: you can set the alarm to be activated: · ONCE ONLY for a one-off alarm, · DAILY for a daily alarm or · STOP to cancel. ç Press R to set the TV to standby. It will automatically switch on at the time programmed. If you leave the TV switched on, it will only change programme at the time indicated. The combination of the CHILD LOCK and TIMER functions may be used to limit the length of time your television is in use, for example, by your children. Locking the set You can bar access to certain programmes or completely lock the set by locking the keys. Locking programmes & Press H. é Select FEATURES (J) and press L. (J) and press L. · · · · PICTURE SOUND FEATURES INSTALL FEATURES · TIMER · CHILD LOCK · PARENTAL CONT · ROTATION ACCES CODE ---- ` Enter your confidential access code. The first time, enter the code 0711 then confirm by re-entering 0711. The menu appears. § Use keys IJ to select the required programme and confirm with L. The symbol + is displayed alongside the programmes or sockets that have been locked. To watch a programme which has been locked you will now need to enter the confidential code; otherwise the screen will remain blank. Caution: in the case of encrypted programmes which use an external decoder, it is necessary to lock the corresponding EXT socket. To unlock all programmes Repeat stages & to ` above, then select CLEAR ALL and press L. To change the confidential code Repeat stages & to ` above, then: ( Select CHANGE CODE and enter your own 4-digit number. è Press R to exit from the menus. If you have forgotten your confidential code, enter the universal code 0711 twice. Locking the keys & Press H, select FEATURES (J) and press L. é Select CHILD LOCK (J) and press L to set the lock to ON. " Switch off the set and put the remote control out of sight. The set cannot be used (it can only be switched on using the remote control). ` To cancel: switch CHILD LOCK to OFF. 8 Teletext Teletext is an information system, broadcast by certain channels, which can be read like a newspaper. [. . . ] Poorly connected euroconnector cables or aerial sockets are often the cause of picture or sound problems (sometimes the connectors can become half disconnected if the TV set is moved or turned). Peripheral equipment gives a black and white picture You have not selected the right socket with the N key: S-VHS2 (S-VHS3) instead of EXT2 (EXT3). To play a video cassette, check that it has been recorded under the same standard (PAL, SECAM, NTSC) which can be replayed by the video recorder. Check that the mode selector on the side of the remote control is set to TV. No sound If on certain channels you receive a picture but no sound, this means that you do not have the correct TV system. [. . . ]