User manual PHILIPS 32PW6516-79R

[. . . ] English 1 Türkçe Slovencina Cestina Polski PyccÍËÈ Magyar Français Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. We hope our technology meets entirely with your satisfaction. [. . . ] This TV set is also equipped with automatic switching which will select the correct surround mode, provided the specific signals are transmitted with the programmes. This automatic format can also be modified manually with the ) key. You have a direct access to the surround modes with the ) key Stereo The sound is reproduced on the left and right loudspeakers of the TV set. Dolby 3 Stereo (with stereo source) The sound is distributed over the left, right and centre loudspeakers. This mode is not recommended for mono transmissions (only the centre channel will be used). 3D Surround (optimal with Dolby Surround source) This mode enables you to experience the effect of Dolby Pro Logic without the need of having rear speakers connected or activated. The sound is reproduced on the left, right and centre loudspeakers giving the impression of a rear surround effect. Hall Surround (with mono or stereo source) The sound is reproduced on the left, right and rear loudspeakers, creating a "Hall Surround" ambient effect. This mode is recommended for broadcasts that are not encoded in Dolby Surround, but where you wish to have a rear surround effect. This mode is only available when surround loudspeakers are connected to the TV set. Dolby Pro Logic * (with Dolby Surround sound source) The left, right, centre and rear speakers reproduce the Dolby Pro Logic sound. This mode is used when a film or programme has been recorded or encoded in Dolby Surround sound. These films or programmes are always indicated by the symbol : £ DOLBY SURROUND. The DOLBY PRO LOGIC mode is only available when surround loudspeakers are connected to the TV set. This mode is not recommended for mono transmissions (only the centre channel will be used). This menu allows you to use your TV as an alarm clock. " Press L to enter and exit the sub-menus and use keys IJ to adjust: ` TIME: enter current time. Note: the time is updated automatically each time the set is switched on using teletext information taken from programme 1. Not have teletext, the update will not take place. è PROG; NO;: enter the number of the programme required. If you leave the TV switched on, it will only change programme at the time indicated. The combination of the CHILD LOCK and TIMER functions may be used to limit the length of time your television is in use, for example, by your children. [. . . ] System: Television pictures are not broadcast in the same way in all countries. 6) is used to select these different standards. This is not to be confused with PAL or SECAM colour coding. Pal is used in the majority of European countries, Secam in France, the CIS and the majority of African countries. [. . . ]