User manual PHILIPS 32PW6826

[. . . ] LASER SAFETY This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. LASER Type Wave length Output Power Beam divergence Semiconductor laser GaAIAs 650 nm (DVD) 780 nm (VCD/CD) 7 mW (DVD) 10 mW (VCD/CD) 60 degree CLASS 1 LASER PRODUCT CAUTION Visible and invisible laser radiation when open. Avoid exposure to beam. ATTENTION aux radiations laser visibles et invisibles lorsque l'appareil est ouvert. OPGELET voor de zichtbare en onzichtbare stralingen wanneer het toestel geopend is. Vermijd elke blootstelling aan straling. [. . . ] SUPERWIDE Mode This mode is used to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture. The IJ keys allow you to move the image up or down. WIDE SCREEN Mode This mode restores the correct proportions of pictures transmitted in 16:9 using full screen display. Note: If you display a 4:3 picture in thid mode, it will be enlarged horizontally. 12 Selecting the correct mode Different modes can be selected to suit different picture formats, use the following diagrams as a guide to which mode to use. & 4:3 Picture There are 5 possible modes for this type of picture ZOOM 14 : 9 MENU 4:3 ZOOM 16 : 9 MENU SUBTITLE ZOOM Subtitles SUPERWIDE Progressive zoom 4:3 Picture Letterbox MENU 4:3 ZOOM 16 : 9 x2 " 16:9 Picture MENU 4:3 WIDE SCREEN x1 13 Using the built-in DVD player The built-in DVD player allows you to play DVD video disks as well as video and audio CDs (including finalised CD-Rs and CD-RWs). The disks can be recognised by their logo on the packaging. Note: Generally, DVD films are not placed on the market at the same time in the various regions of the world. Accordingly, DVD players are provided with geographical zone codes. If you insert a disk which has a regional code that is different from that of your reader, you will see a message displayed on the screen. The disk cannot be played and you will have to remove it. Inserting a disk & Opening the drawer Press the EJECT button twice on the front, to the left of the drawer. The television automatically switches to DVD mode and the drawer opens. " Closing the drawer Gently push the drawer back in or press the EJECT button next to the drawer to close. The disk will begin to play. Inserting the disk Place the disk in the drawer, with the label facing upwards. Makes sure that it is positioned correctly in the recess. ` Automatic play Play begins automatically when the drawer closes. A status window appears on the left of the screen and indicates the current operation, the type of disk and its length. Next, the content of the disk is displayed. 14 Playing a DVD or video CD w To access the DVD functions you must first switch the mode selector ` TV VCR . i | OE 1 4 7 SMART 2 5 8 0 3 6 9 SMART DVD - MENU " [ P OSD OK % > Y located on the side of the remote control to the DVD position. Play Once the disk has been inserted and the drawer closed, play begins automatically. Certain disks will ask you to select a heading from a menu. Use the buttons 09 or IJ KL then press P (button C). Stopping play Press the button to stop play. The default screen appears and displays information on the player status. Re-starting play ("resume" function) When you stop a disk mid-play (by switching to TV mode, standby, ejecting the disk or pressing ), you can resume play at the exact point you stopped the disk. Simply press the button, then when you see the R symbol (resume), press again (otherwise the disk will start playing from the beginning). The resume function remenbers the last 4 disks played. Simply re-insert the disk and when you see the R symbol press . Slow motion, fast forward and rewind During play, press the J button to slow play down to 1/2, 1/4 or 1/8 speed. Press the or (or KL) button to fast forward or rewind at x4 or x32 speed. Freeze-frame Press (or I) to freeze the image. [. . . ] The TV set does not react to the remote control; the indicator on the set no longer flashes when you use the remote control?Standby When you switch the TV set on it remains in standby mode and the indication LOCKED is displayed when you use the keys on the TV set?The CHILD LOCK function is switched on (p. If the set receives no signal for 15 mins, it automatically goes into standby mode. [. . . ]