User manual PHILIPS 34PW8502

[. . . ] Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require that you contact your dealer or request service. WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE. BASIC TV CONNECTIONS CABLE TV Direct Cable Connection: Cable signal coming from Cable Company (Round 75 coaxial cable) AC Power Wall Outlet Y our Cable TV input into your home may be a single (75 ohm) cable or a converter box installation. In either case, the connection to the TV is very easy. [. . . ] Press LEFT/RIGHT to access the submenus and adjust the settings. Volume +/­ Press to adjust the TV sound level. Number buttons Press to select TV channels. When selecting single-digit channels, press the number of the desired channel. The TV will pause for a few seconds and then tune to the selected channel. TV/VCR Press while in VCR mode to view the playback of a videotape. A/CH Press to alternate between the currently viewed channel and the previously viewed channel. Rec ¶ Press this button simultaneously with the 3 (VCR PLAY) button when in VCR mode to record. SAP Press to select between main sound and SAP (Second Audio Program) when you tune to a program offering SAP. AV Press repeatedly to select the different signal sources connected to the TV: TV, AV1, CVI, AV2, AV3 (side jack panel), AV4 and the current channel. Clock Press to access the onscreen Timer menu, where you can set the time for the TV's clock or set the TV's Timer features, such as channel switch over, power on set, and power off set. Sleep Press to set the TV to automatically turn itself off after a period of time. Choose 15, 30, 45, 60, 90, 120, 180, or 240 minutes before the TV will automatically turn off. Program List Press to display a list of channel numbers and their names. (See the "Tuner Mode, " "Auto Program, " "Channel Edit, " and "Name" sections of this guide for setup. ) Each channel will appear as a selectable menu item. The current channel will be highlighted as default. Five channels will be listed on screen at one time. Press the Cursor Ring up or down to scroll the list and and highlight a channel. Press the Cursor Ring right to tune to the highlighted channel. Channels marked "Skipped" in the Channel Edit control will not appear in the list. Each channel that is being blocked by AutoLockTM will appear with a padlock icon to indicate that the channel is not viewable. Dolby V Press to select various factory surround sound listening modes. [. . . ] It does not change the other onscreen text features, such as Closed Captioning (CC), with TV shows. POSITION PIP TUNER MODE he TUNER MODE feature allows you to change the TV's signal input to CABLE, ANTENNA, or AUTO mode. It's important for the TV to know if you want to receive channels from a cable TV signal or a normal antenna signal. NOTE: The AUTO mode setting helps the TV determine the type of signal or channels being received when AUTO PROGRAM is activated. POWER TV SWAP VCR PIP CH DN UP ACTIVE CONTROL FREEZE 1 2 3 4 5 6 7 Press the MENU/SELECT button on the remote control to show the onscreen menu. Press the CURSOR RING DOWN button repeatedly until INSTALL is highlighted. [. . . ]