User manual PHILIPS 36PW9618

[. . . ] tv Information for users in the UK (Not applicable outside the UK) Positioning the TV For the best results, choose a position where light does not fall directly on the screen, and at some distance away from radiators or other sources of heat. Leave a space of at least 5 cm all around the TV for ventilation, making sure that curtains, cupboards etc. cannot obstruct the air flow through the ventilation apertures. The TV is intended for use in a domestic environment only and should never be operated or stored in excessively hot or humid atmospheres. [. . . ] Hall The sound signal is distributed over the rear loudspeakers which creates a hall effect from the rear. The centre loudspeaker does not reproduce any signal. Dolby Pro Logic II (optimal with Dolby Surround broadcasting) All front and rear loudspeakers reproduce the Dolby Surround Pro Logic II sounds. This sound is always present in the movie or programme marked with G Dolby Surround. Note: · Normal stereo broadcast is not always encoded to produce a rear surround sound effect. · In case of a Cinema Link receiver configuration connected, only the surround modes of the external receiver can be selected. Dolby Digital When you have connected a DVD player or a Laser Disc player (see Connect Peripheral equipment, Digital equipment, p. 21), you can enjoy MultiChannel Surround Sound in your home when playing discs recorded in Dolby Digital. In addition to the centre, the left and right internal speakers, the left and right rear surround loudspeakers reproduce the Dolby Digital Surround sounds. Dolby Digital sound reception info via the i key Press the i key. When Dolby Digital sound is reproduced, the sound info on screen displays the number of loudspeaker signals which are transmitted. This is indicated by 2 numbers: the first one indicates the number of front loudspeaker signals, the second one the number of rear loudspeaker signals. `Dolby Digital 3/2' means that 3 front signals are transmitted: left, right and centre, and 2 rear signals: left and right surround. `Dolby Digital 1/0' means that a mono signal is transmitted. `Dolby Digital 2/0', `MPEG' or `PCM' means that the transmission contains a stereo signal which can be Dolby Surround encoded. In this case the surround mode will display Dolby Pro Logic II. * Dolby' `Pro Logic' and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation. 14 Features menu Features TV Programme list Subtitle Sleeptimer Child lock On timer Zoom Off On On during mute Press the cursor right to select Features. Select the menu items with the cursor up/down and adjust the settings with the cursor left/right. Use the on-screen Menu-Info i for more information about the menu items. Programme list Press the OK key to switch over to the selected TV channel or external. Select subtitles The subtitle page must be stored for each TV channel: Switch on teletext and select the proper subtitle page from the index. Subtitle On will automatically display them on the selected TV channels if subtitles are in the transmission. A symbol will indicate that the mode is on. Select On during mute when you want to have the subtitles automatically displayed only when the sound has been muted with the ¬ key on the remote control. On timer & Select On timer with the cursor down. Off On VCR1 BBC2 CNN TVE . . . . . [. . . ] Power consumption: 1 W. 26 Table of TV frequencies. Liste des fréquences des émetteurs. Tabella delle frequenze delle trasmittenti. Lista de las frecuencias de las emisoras. [. . . ]