User manual PHILIPS 37257-53-16

[. . . ] Once tuned, change channels at the cable box, not the television. *Use AV button on the remote control to select AV or Side AV if you use the different jacks for the hookup to watch VCR. Accessory device equipped with component video outputs Component *Use AV button on the remote control to select CVI1 or CVI 2 to watch DVD. Note: The Y, Pb, Pr jacks do not provide audio, so audio cables must be connected to provide sound. [. . . ] The current menu item can be selected by means of the Up/Down keys. Submenus can be accessed from menu items indicated with a ">" symbol by pressing the Right key. TV up/down (+/-), INFO up/down (+/-), PAY-TV up/down (+/-) and RADIO up/down (+/-) are available when Setup menu had did the relevant settings. Multi RC Set-up procedure: INPUT TUNER SYSTEM RC Menu key together with one of the coloured keys (Red/Green/Yellow/Blue) for at least 4 seconds. Communication protocols that are used in conjunction with the Data 1 (RJ12) or/and LABEL ( )> Data 2 (RJ45) connectivity to an external STB or Smart Card Xpress Box. HM-Link is mainly used in conjunction with Data 1 (RJ12) connectivity to an external STB. The Multi RC TV PROTECTION CONFIGURATIONNO when the RC batteries are changed. CHANNEL: The channel type can be selected with the cursor Left/Right key. the available options are: "TV" , "INFO" , "PAY TV" and "RADIO". Note: Use the numeric keys to enter the program number. For program number below 10, enter the first digit as "0" followed by the program number. SWITCH ON/OSD o ON: Similar function as "FORCED ON" but the remote control STANDBY key function is enabled when TV is set to this mode. In this sub menu, the Picture and Sound settings of the TV can be selected. CONTRAST: This changes the difference between the light and dark tones. TREBLE/BASS: This adjusts the level of treble and bass effects on the TV's sound output. bRIGHTNESS 50 · AVL (Automatic Volume Leveller): This option is used to limit the increase in sound level especially during programme COLOUR 50 SECURITY change orCONTRAST advertising slots. In this sub menu, the Security settings of the TV can be configured. O When the set is in the SECURITY STANDARD mode, the SETUP menu can be accessed with a guest remote control by a sequence of commands (3 1 9 7 5 3 MUTE). In this sub menu, the CONTROL settings of the TV can be configured. ESP: Energy Saving Programmability Mode (ESP) function controls the maximum continuous viewing time allowed and its valid values are 00 - 99 (in hours). AUDIO/VIDEO MUTE: The Audio/Video Mute menu function determines whether the video should be blanked and the audio should be muted if the currently tuned channel has no signal. STEP TUNING: If YES is selected, TV programs (1 to 9) are tuned immediately when a digit is pressed. [. . . ] It is also used for audio-video processors, which handle both types of signals. By offering the cinch-type input (YPbPr) the primary colors, red, green and blue are connected from a set top box directly into the TV allowing for the signal to display on the screen. The generally agreed upon definition of HDTV is approximately twice the vertical and horizontal picture resolution of today's NTSC TV, which essentially makes the picture twice as sharp. HDTV also has a screen ratio of 16:9 as compared with most of today's TV screens, which have a screen ratio of 4:3. [. . . ]