User manual PHILIPS 37HF7444

[. . . ] Information for users in the UK (not applicable outside the UK) Positioning the TV For the best results, choose a position where light does not fall directly on the screen, and at some distance away from radiators or other sources of heat. Leave a space of at least 5 cm all around the TV for ventilation, making sure that curtains, cupboards etc. Cannot obstruct the air flow through the ventilation apertures. The TV is intended for use in a domestic environment only and should never be operated or stored in excessively hot or humid atmospheres. [. . . ] You can secure your batteries by fastening an appropriate screw into the hole of the battery cover. An indicator on the front of the TV lights up and the screen comes on. When the set is in the High Security Mode, the Setup menu can be accessed only with an Institutional Set-up Remote Control (RG4172BK or RC2573). When the set is in the Standard Security Mode, the Set-up Menu may be accessed either with an Institutional Set-up Remote Control, or with a guest remote control (like the RC2886) using an authorized access code. The current menu item can be selected by means of the cursor up and cursor down keys. Submenus can be accessed from menu items with a ">" symbol pressing the cursor right key. TELEVISION up/down, INFO up/down, PAY-TV up/down and RADIO up/down are active in menu mode and the television reacts the same way as in TV mode. Clock Setup: The Clock set-up menu can be entered from this menu item (this menu option is only available on certain LCD TV models). When this menu is open, all the protections are inactive. : The program type can be selected with the cursor left/right buttons. These buttons will toggle between all available types: "TV", "INFO", "PAYTV" and "RADIO". If the program number of a certain type is 0, the corresponding type is not displayed. In order to display a program number of the above-mentioned types, always enter two numbers, for example: "01" for TV1 or digit "1" and up/down cursor. Some input sources may not be available on certain sets (see accompanying table). Model / Input 26HF5444 AV2 Side AV Side S-Video EXT4 HDMI Scart2 AV-In S-Video In YPbPr HDMI1 / CVBS HDMI2 26HF7874 Scart1 Scart2 AV-In S-Video In YPbPr HDMI1 / CVBS HDMI2 32HF7444 Scart1 Scart2 AV-In S-Video In YPbPr HDMI1 / CVBS HDMI2 32HF7874 Scart1 Scart2 AV-In S-Video In YPbPr HDMI1 / CVBS HDMI2 37HF7444 Scart1 Scart2 Video In S-Video In YPbPr HDMI1 / CVBS HDMI2 Note: When a SmartCard XPress Box is used, it is usually connected to Scart1. Right cursor starts an auto search; during frequency entry the digits not yet entered are displayed as dashes "-". Enter "0" for frequencies below 100 MHz. Label: This menu item will be used to add a label/name for each program. O Pressing the left/right buttons you may enter or exit the label field; pressing the up/down cursor you may insert alphanumeric characters. Store: The present program information is stored after pressing the cursor left/right button. Mute: This item enables/disables picture and sound for the particular channel. O NONE: normal picture and sound enabled o VIDEO: picture is blanked for this channel (e. [. . . ] The ESP Menu function is shown as "ESP", and its valid values are 00 - 99 (in hours). Audio/Video Mute: The Audio/Video Mute function determines whether the video should be blanked and the audio should be muted if the currently tuned channel has no signal. Step Tuning: If YES, TV programs (1 to 9) are tuned immediately when a digit is pressed. Digit Timeout: This is the time-out to enter the second digit for TV program 10 onwards. [. . . ]