User manual PHILIPS 37KV1232/08B

[. . . ] Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once or visit at www. Com/support to ensure: *Product Safety Notification By registering your product, you'll receive notification directly from the manufacturer - in the rare case of a product recall or safety defect. *Additional Benefits Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving offers. [. . . ] *1 If it fails then refer to the router's manual for more details. Search for wireless networks automatically and select the SSID from the list. Enter the key of the selected wireless network using , then press OK. Clear : Clear the entered number or word. Allclear : Clear all the entered numbers or words. Language Channels Preferences Network Reset AV settings English Autoprogram Location Network settings assi Start now Scan Manualentry 1 *1 WPS (Easy Connect) cannot be used when the security protocol is set to WEP. Change the Access Point's security mode from WEP to WPA or WPA2 (recommended). Picture Sound Features Installation Software Wiredsetting Select to use an Ethernet cable to connect to the Internet by wired connection. Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment. 42 Manualnetworksettings 2 Networksettingsassistant Before you proceed to Connectiontest or other settings in Network section, set this selection to suit your preference. Use to select Manualnetworksettings, then press OK. If your wireless network with authentication setting (WEP*2, WPA-PSK or WPA2-PSK), WEP*2 /WPA /WPA2 Key entry screen will appear. Enter the WEP*2 /WPA /WPA2 key of the selected wireless network using , then press OK. None WEP*2 WPA-PSK WPA2-PSK Set the authentication setting to None. For a wireless network without authentication setting, select None. Enter the WEP*2 / WPA /WPA2 key of the selected wireless network using , then press OK. *2 WEP is not recommended to be used due to its Major security flaws. Change the Security protocol on the wireless router to WPA or WPA2 (recommended) mode. WPScode Manual *1 WPS (Easy Connect) cannot be used when the security protocol is set to WEP. Change the Access Point's security mode from WEP to WPA or WPA2 (recommended). *2 WEP is not recommended to be used due to its Major security flaws. Change the Security protocol on the wireless router to WPA or WPA2 (recommended) mode. [. . . ] There are various worldwide laws, regulations, and executive orders applicable to dispositions of Covered Code, including without limitation export, re-export, and import control laws, regulations, and executive orders, of the U. Government and other countries, and Recipient is reminded it is obliged to obey such laws, regulations, and executive orders. Recipient may not distribute Covered Code that (i) in any way infringes (directly or contributorily) any intellectual property rights of any kind of any other person or entity or (ii) breaches any representation or warranty, express, xii 7. Implied or statutory, to which, under any applicable law, it might be deemed to have been subject. [. . . ]