User manual PHILIPS 37PFL7332D/37E

[. . . ] Please act according to your local rules and do not dispose your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. · Standby Power Consumption for this set is less than 1 W. · Power Consumption of the set can found on the type plate at the rear of the TV. · For more specifications of the product see the product leaflet on www. philips. [. . . ] To avoid the interruption of your future recording, it is recommended that you stay in digital mode for about a minute if a recording has been programmed. 26 19 Digital teletext (MHEG) 3 When you have finished watching teletext, select a different channel with P ­ / + keys or follow the on screen instructions to return to picture. When you switch to a digital channel with links to a telext service, software is downloaded in the background to enable the teletext function. You will have to wait for a while before you press the key to allow the software download to complete. If you press the key before the download is complete, there will be a short delay before the teletext screen is displayed. While navigating the digital teletext, there is a short delay while the page downloads. A prompt or message is often broadcast on the page to let you know the progress. Available in U. K. only Digital teletext services differ greatly from analogue teletext. When you switch to a Digital teletext service, the images you see contain graphics and text which are laid out and controlled in a manner decided by the broadcaster. Some digital channels, which you select like any other channel, offer dedicated teletext services. Some digital channels also offer information on the programme being broadcast (a message or an instruction may appear on the screen). Under certain circumstances, Digital text or interactive services may have priority over subtitles. If it is in digital mode, press the (Analogue / Digital) key to enter the analogue mode. 1 Press the key. IMPORTANT To exit or interrupt the search before it is completed, press the key. If you interrupt search during auto store, not all channels will be stored. For all channels to be stored, you need to do a complete auto store search again. Note ATS (Automatic Tuning System) feature If the transmitter or cable network sends the automatic sort signal, the programmes will be numbered correctly. In this case, the installation is complete. If this is not the case, you can use the Sort menu to number the programmes to your preference. ACI (Automatic Channel Installation) feature If a cable system or a TV channel which broadcasts ACI is detected, a programme list appears. Without ACI broadcast, the channels are numbered according to your language and country selection. You can use the Sort menu to renumber them. Note You cannot change the Language or Country in Analogue mode. [. . . ] This provides better picture quality than with standard video (VHS and 8 mm) where the Y/C signals are combined to provide only one video signal. 16:9 : Refers to the ratio between the length and height of the screen. Wide screen televisions have a ratio of 16/9, conventional screen TV sets have a ratio of 4/3. System : Television pictures are not broadcast in the same way in all countries. There are different standards: BG, DK, I, and LL'. The System setting (page 24) is used to select these different standards. [. . . ]