User manual PHILIPS 4 HD HIFI LED CLOCK VCB611AT

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. N EE DED AY W Congratulations on your purchase, and welcome to the "family!" Dear Magnavox product owner: Thank you for your confidence in this product. You've selected one of the best-built, best-backed products available today. And we'll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Magnavox "family, " you're entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. [. . . ] q ONCE: The VCR will record a TV program on any day you choose, up to 12 months away. q DAILY: The VCR will record the same channel every day from Monday to Friday ­ starting at the same time and recording for the same length of time. q WEEKLY: The VCR will record the same channel on the same day, at the same time, and for the same length of time every week. Daily Recording (example) DAILY PROGRAM (MON-FRI) PROGRAM -1 2 3 4 5 6 7 8- Helpful Hint · If you need to make a correction while programming a timer recording, press the CLEAR button until the cursor is flashing on the item you want to change. Then enter the correct information. SELECT PROGRAM NUMBER TO END PUSH EXIT Timer Recording (cont'd) 29 4 5 Use the Number buttons (1-8) to select a slot in which to store the timer recording. Numbers for open slots will flash on the screen. NOTE: If you enter a number for a slot that has already been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen briefly. Information about the program in that slot will appear on the screen. If this happens, press the STATUS/EXIT button, then select another number. 4-7 POWER VCR/TV EJECT Use the Number buttons to enter the channel you want to record. q Cable Users, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0, 6. (If PROGRAM NOT COMPLETED appears, try again from step 1. ) 10 11 10 Turn off the VCR for the recording. Leave the Cable Box/DBS on (if applicable). Cassette type/Playback Time T160 T120 T60 2 hrs. 3 hrs. Press the POWER button to turn off the VCR power. The Timer Light will appear on the display panel. If the timer recording will take place several hours or days from now, you may use the VCR until time for the recording. Turn off the VCR a few minutes before the recording starts. If you forget to turn off the VCR, PLEASE TURN OFF VCR FOR TIMER RECORDING flashes on your TV screen two minutes before a timer recording starts. Press the CLEAR button to remove the message. Tape Speeds This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. When recording, you can change the tape speed (SP or SLP) using the SPEED button. [. . . ] Virgin Islands, contact Philips Service Solutions Group at 1-800-531-0039 to obtain the cost of out-of-warranty exchange. Please record below the model and serial numbers found on the product. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary. [. . . ]