User manual PHILIPS 4 HD HIFI LED CLOCK VCR VRX262AT99

[. . . ] Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. [. . . ] Then information about the program in that position will be displayed on-screen. if this happens , press the STATUS/EXIT button twice. (If you do not press any buttons within 60 seconds, you will return to the previous menu. Q If you have a basic antenna or cable hookup (as shown on pages six-seven) enter the channel of the TV program you want to record. (You must enter a 0 before all single digit channels. ) q If you are recording from line input, press 0, 0. Q If you are using a Cable Box, enter the Cable Box output channel (channel 03 or 04). Press two Number buttons for the hour you want the recording to begin. Press two Number buttons for the minute(s) you want the recording to begin. Follow the instructions in step 6 to set the recording's stop time (AM or PM will be set automatically). Press the Number 1 button to record in SP speed, press the Number 2 button to record in LP speed, or press the Number 3 button to record in SLP speed. You cannot use the (Tape) SPEED button at this time. Press two Number buttons for the month and two Number buttons for the day you want to record the program. for example , for July 10 , 1997 , press 07 , 10. The day of the week and the year will be displayed automatically (you cannot program the VCR to record more than one year in advance). The VCR must be off for a timer recording to take place!PROGRAM WAS COMPLETED PLEASE TURN OFF VCR FOR TIMER RECORDING will appear on-screen (if PROGRAM NOT COMPLETED appears, try again from step 1). The VCR must be turned off for a timer recording to take place. (If the timer recording will take place several hours or days from now, you may use the VCR until time for the recording. Just turn off the VCR a few minutes before the recording starts. ) If you forget to turn off the VCR, PLEASE TURN OFF VCR FOR TIMER RECORDING flashes on your TV screen two minutes before a timer recording starts. remove the message by pressing the CLEAR button. [. . . ] AUDIO IN/OUT Jacks: jacks located on the back of the VCR which are used to record audio from another source (IN) or to send audio to another source (OUT). Automatic Channel Programming: process in which the VCR scans all available channels and places the ones you receive in its memory. Then, when you push the CHANNEL (Up/Down) buttons, you only scan through channels you receive. Cable ­ all standard channels can be received without a Cable Box. [. . . ]