User manual PHILIPS 4 HD HIFI LED CLOCK VCR VRZ263AT

[. . . ] VRZ263(H1955). QX33 4/9/99 9:42 AM Page 1 Video Cassette Recorder VRZ263AT Owner's Manual Important!Return your Warranty Registration Card within 10 days. See why inside. VRZ263(H1955). QX33 4/9/99 9:42 AM Page 2 Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. [. . . ] Press two Number buttons for the minute you want the recording to begin. For example, for 9:30 PM, press 09, 30, 2. ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON ­­:­­ TO CORRECT PUSH CLEAR TO END PUSH EXIT 7 Follow the instructions in step 6 to enter the recording's stop time. (AM or PM will be set automatically. ) ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF ­­:­­ TO CORRECT PUSH CLEAR TO END PUSH EXIT Helpful Hint · Entries that do not match the VCR's clock or calendar will cause a question mark to appear on-screen. Instructions continue on page 32. VRZ263(H1955). QX33 4/9/99 9:43 AM Page 32 32 Timer Recording (cont'd) 8 Press the Number 1 button to record in SP speed, the Number 2 button to record in LP speed, or the Number 3 button to record in SLP speed. (See the chart below. ) You cannot use the SPEED button at this time. ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP SP=1 LP=2 SLP=3 TO CORRECT PUSH CLEAR TO END PUSH EXIT 11 8 POWER VCR TV CBL/DBS VCR/TV 1 2 5 8 0 3 6 CHANNEL 9 9 4 7 VCR PLUS+ /ENTER 9 +100 MUTE VOLUME SPEED TIME SEARCH Press two Number buttons for the month and two Number buttons for the day you want to record the program. For example, for July 10, 1998, press 07, 10. The day of the week and the year will appear automatically (you cannot program the VCR to record more than one year in advance). ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP START DATE 07/10/98 FRI. TO CORRECT PUSH CLEAR TO END PUSH EXIT PLAY REW STOP REC/OTR MEMORY PAUSE/STILL F. FWD SLOW MENU STATUS/EXIT CLEAR EJECT 10 10 Press the STATUS/EXIT button. PROGRAM WAS COMPLETED / PLEASE TURN OFF VCR FOR TIMER RECORDING will appear on-screen briefly. (If PROGRAM NOT COMPLETED appears, try again from step 1. ) Turn off the VCR power. The Timer light will appear on the display panel. If the timer recording will take place several hours or days from now, you may use the VCR until time for the recording. Turn off the VCR a few minutes before the recording starts. If you forget to turn off the VCR, PLEASE TURN OFF VCR FOR TIMER RECORDING flashes on your TV screen two minutes before a timer recording starts. Press the CLEAR button to remove the message. Tape Speeds This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. When recording, you can change the tape speed using the SPEED button. 11 The VCR must be off for a timer recording. Put a tape in the VCR. Tape Speed Maximum Record/Playback Time Type T160 T120 T60 SP 2 hrs. (Super Long Play) VRZ263(H1955). QX33 4/9/99 9:43 AM Page 33 Timer Recording (cont'd) 33 Checking or Cancelling Timer Recordings 1 2 3 4 5 6 2-3 POWER VCR With the VCR on and in VCR position (the VCR light will appear on the display panel), press the VCR button, then press the MENU button. TV CBL/DBS VCR/TV 1 4 7 VCR PLUS+ /ENTER 2 5 8 0 3 6 CHANNEL Press the PLAY/o button or the STOP/p button to select PROGRAM, then press the F. FWD/B button. 9 +100 MUTE VOLUME SPEED TIME SEARCH PLAY REW STOP REC/OTR MEMORY PAUSE/STILL Press the PLAY/o button or the STOP/p button to select PROGRAM REVIEW, then press the F. FWD/B button. The timer recording information for the program in the lowest numbered slot will appear on-screen. If no timer recordings are set, nothing will happen when you press the F. FWD/B button. F. FWD 4 5 SLOW 1 MENU STATUS/EXIT CLEAR EJECT Press the F. FWD/B button repeatedly to review all programmed timer recordings. If you don't press the F. FWD/B button within 10 seconds, the VCR will automatically display information about the next programmed timer recording. [. . . ] This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted. ) · damage caused by the use of non-VHS tapes or tapes that have not been tested and labeled for use in two, four, six, and eight hour VHS recorders. · a product that is used for commercial or institutional purposes (including but not limited to rental purposes). Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics Company. In countries where Philips Consumer Electronics Company does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available). [. . . ]