User manual PHILIPS 4 HD HIFI REG. CLOCK VCR VRA656AT98

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. N EE DED AY W Congratulations on your purchase, and welcome to the "family!" Dear Magnavox product owner: Thank you for your confidence in this product. You've selected one of the best-built, best-backed products available today. And we'll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Magnavox "family, " you're entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. [. . . ] The VCR/TV light will appear on the display panel. The channel being recorded will appear on the screen. 1 6 3 4 REC/OTR /STOP PAUSE/STILL Press the STOP/p button to stop the recording. Select the channel you want to watch at the TV. Select channel 03 or 04 at the TV. Helpful Hint · If you use a Cable Box or Direct Broadcast System hookup, you may not be able to watch one channel while recording another. See pages eight-nine for details. One-Touch Recording 27 The One-Touch Recording (OTR) feature allows you to set an immediate timed recording 30 minutes to eight hours long. Before you begin: q Set up the channels at the VCR. q Select a recording speed (SP, SLP) with the SPEED button. Make sure the tape's record tab is intact and the tape is long enough to record the program(s). If the end of a tape is reached during an OTR, the VCR will eject the tape and turn itself off. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once. ) POWER VCR/TV EJECT 1 2 5 8 0 3 6 9 CHANNEL Press the CHANNEL o/p buttons or the Number buttons to select the channel you want to record. SPEED 1 2 1 2 4 7 TIME SEARCH MEMORY MENU STATUS/EXIT CLEAR SLOW Press the REC(ord)/OTR button repeatedly until the desired recording length (30 minutes to eight hours) appears on the screen. The REC(ord) light and the TIMER light will appear on the display panel. OTR (0:30) CH12 REWIND /PLAY F. FWD REC/OTR /STOP PAUSE/STILL 3 Helpful Hints 3 To stop an OTR before recording is finished, press the STOP/p button. Information about the program in that slot will appear on the screen. If this happens, press the STATUS/EXIT button, then select another number. 4-7 POWER VCR/TV EJECT Use the Number buttons to enter the channel you want to record. q Cable Users, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0, 6. If you only press the Number 6 button, channel 6 will be selected after a brief delay. There also may be a brief delay when you select channels 10, 11, and 12. If you want to select channels 100 and above, enter channel numbers as a three-digit number. For example, to select channel 117, press 1, 1, 7. Antenna Users, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 5, press 0, 5. If you only press the Number 5 button, channel 5 will be selected after a brief delay. [. . . ] Bands: settings that allow you to tune channels. · Antenna ­ VHF (very high frequency; channels 2-13) and UHF (ultra high frequency; channels 14-69). · Cable ­ all standard channels can be received without a Cable Box. Dubbing: copying a tape using a second VCR. [. . . ]