User manual PHILIPS 4 HD HIFI SMALL CLOCK VCR VRX364AT99

[. . . ] Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. [. . . ] To return to the channel being recorded, press the TV button, then use the Number buttons to select channel 03 or 04 (whichever channel the CH3/CH4 switch on the back of the VCR is set to). Or, if the VCR remote control doesn't operate your TV, use the TV remote control to select channel 3 or 4. If your remote control operates your TV, press the TV button, then use the CHANNEL (Up/Down) buttons on the remote control to select TV channels. If you use a Cable Box or Satellite System hookup, you may not be able to watch one channel while recording another. If you don't receive channels, check your hookups, then follow the instructions above carefully. The one touch recording (OTR) function allows you to program an immediate timed recording 30 minutes to eight hours long without setting the timer. Before you begin, make sure: q Channels are programmed. Q The desired recording speed (SP, LP, or SLP) has been selected with the (Tape) SPEED button. Make sure the tape's record tab is intact and the tape is long enough to record the program(s). If the VCR light does not appear, press the VCR/TV button once. Press the REC(ord)/OTR button repeatedly until the desired recording length (30 minutes to eight hours) appears in the upper left corner of the screen. The REC(ord) light and the Timer light will appear on the display panel. To stop an OTR before recording is finished, press the STOP button or the POWER button. To cancel the OTR but continue recording, press the REC(ord)/OTR button until REC appears in the upper left corner of the TV screen. The REC(ord) light will remain on the display panel of the VCR, but the Timer light will disappear. To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired length appears on-screen. ⷠIf you begin an OTR when a recording is paused, the OTR will begin. ⷠYou can not pause recording (for example, during commercials) during an OTR. ⷠIf the preset time for a timer recording comes up during an OTR, the OTR has priority. Follow the steps below to program your VCR to record TV programs while you're away from home. You can program up to eight timer recordings. For each one, the VCR will turn itself on, record, and turn itself off automatically. [. . . ] Automatic Channel Programming: process in which the VCR scans all available channels and places the ones you receive in its memory. Then, when you push the CHANNEL (Up/Down) buttons, you only scan through channels you receive. Cable ­ all standard channels can be received without a Cable Box. cable Box/DSS Receiver Output Channel: Channel 03 or 04. [. . . ]