User manual PHILIPS 4 HD SMALL CLOCK VCR VRX344AT

[. . . ] Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04), and set your Cable Box/DBS to the channel you want to record. When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 5 on page 35. ) Leave the Cable Box/DBS on for a timer recording. q If you use the VCR Plus+ Programming system, set the Cable/TV channel to 3 or 4 (Cable Box/DBS output channel) for every VCR Plus+ channel in the VCR Plus+ Cross Reference Map. [. . . ] q You may not record scrambled channels. 1 Cable Signal VCR AUDIO ANT IN 2 IN Cable Box/DBS 75 ANT CAB / LE L OUT IN R VIDEO OUT IN CH3 CH4 OUT OUT RF coaxial cable RF coaxial cable 3 TV's ANTENNA IN Jack Connections 1 2 3 1 2 3 Connect a Cable signal to the VCR's ANT(enna) IN Jack. Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS. Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV. Recording One Channel/Watching Another Put the Cable Box/DBS on the same channel as the VCR's CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel (03 or 04). Then, with the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) o/p button to select the channel you want to record at the VCR. Start the recording. Press the VCR/TV button once to put the VCR in TV position. (The VCR light will disappear. ) Helpful Hint · When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04). Select the channel you want to watch at the Cable Box/DBS. 10 Hookups With a Stereo TV 1 AUDIO ANT IN L OUT IN antenna or cable to ANT(enna) IN Jack Audio and Video IN Jacks on TV R VIDEO OUT IN CH3 CH4 OUT VIDEO (yellow) and AUDIO (red and white) OUT Jacks 2 3 Video Cable Audio Cable q Audio and Video cables are not supplied. 1 2 3 4 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV. Connect an audio cable to the red and white AUDIO OUT Jacks on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jacks on your TV. Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner's manual for details. Helpful Hint · A stereo audio cable (not supplied) is used here to deliver audio to the TV's left and right channels. 28 Front Panel F. FWD (Fast Forward) Button When playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen. Press to select an item in the VCR menu or to change the setting of a menu item. During tape playback, press to freeze the picture. REC(ord)/OTR Button Press once to start a recording. Press repeatedly to start a One-Touch Recording. Details are on page 32. Rear Panel 29 ANT(enna) IN Jack Connect your antenna or cable here. AUDIO IN Jacks Connect audio cables coming from the AUDIO OUT Jacks of a camcorder, another VCR, or an audio source here. AUDIO OUT Jacks Connect audio cables going to the AUDIO IN Jacks of a camcorder, another VCR, or an audio system here. Details are on pages 43 and 55. AUDIO ANT IN L OUT IN R VIDEO OUT IN CH3 CH4 OUT VIDEO OUT Jack Connect a video cable going to the VIDEO IN Jack of a camcorder, another VCR, or an audio-visual system (monitor, laser disc player, video disc player, etc. ) here. VIDEO IN Jack Connect a video cable coming from the VIDEO OUT Jack of a camcorder, another VCR, or an audio-visual source (laser disc player, video disc player, etc. ) here. Details are on page 43. CH3/CH4 Switch Set to channel 3 or 4 to use your TV with your VCR. OUT Jack Use the supplied RF coaxial cable to connect this jack to the ANTENNA IN Jack on your TV, Cable Box, or Direct Broadcast System. Details are on pages six-nine. AC Power Cord Connect to a standard AC outlet to supply power to the VCR. Rerecording (Tape Duplication) 43 1. [. . . ] Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2 q Audio and Video cables are not supplied. 3. RF coaxial cable from the OUT jack of VCR 2 to the TV's ANTENNA IN Jack 1 2 3 4 5 6 7 Make the connections shown above. VCR 1 will play your tape. Put a prerecorded tape in VCR 1. VCR 2 will record your tape. (The VCR light will appear on the display panel. [. . . ]