User manual PHILIPS 40546-17-13

[. . . ] Do not place or drop a razor or charging stand into water or other liquid. Always unplug this razor/charging stand from the electrical outlet immediately after use, except when razor is (re)charging. Unplug and remove power supply cord from razor before cleaning. Keep the razor, charging stand, cord and charging plug away from heated surfaces. [. . . ] You may also shave using the cord provided. This razor will not recharge while being used corded. Recharge only when the bottom light on the display lights up red. Do not charge/recharge or use razor corded until fully dried. Position making sure charging contacts in bottom of stand fit into recess in bottom of razor. An adaptor plug may be necessary for charging plug usage in some foreign countries. Use an attachment plug adaptor of the proper configuration for the power outlet. the charging plug will automatically convert to work on 100V to 240V AC systems. First time charging and recharging after non-use for 1 month or more requires a full 4 hours. a fully charged razor has a cordless shaving time of up to 30 days. When batteries are fully charged, all the "lights" in the display will light up green. Choose comfort control setting "N" to tighten the spring and pressure of the floating heads against your skin for a faster shave. The in-between positions are best suited for skin types between normal and sensitive. Use this razor for its intended household use as described in this manual. Shaving with a clean, dry face gives the best results. Shave against the direction of beard growth using both straight and circular movements. Stretch your skin with your free hand so blades can lift and cut whiskers. Gently press razor to skin so the floating heads can follow the contours of your face. Too much pressure can pinch the skin into the combs. turn razor OFF by pressing the on/off button once. Put the protective razor head cap on the razor to protect razor heads. Indicates that the razor can be rinsed under running tap water. [. . . ] Separate the cutter from the comb and rinse clean under hot water. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored. Clean trimmer with the brush every time you use it. [. . . ]