User manual PHILIPS 40723-17-16

[. . . ]  hilips plays an active role in the development P of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products. General information To avoid damage or malfunction: • Do not expose the headset to excessive heat. •  pparatus shall not be exposed to dripping A or splashing. •  o not allow your headset to be submerged D in water. •  o not use any cleaning agents containing D alcohol, ammonia, benzene, or abrasives. [. . . ] • f cleaning is required use a soft cloth, if I necessary dampened with a minimum amount of water or diluted mild soap, to clean the product. About operating and storage temperatures •  o not operate or store in a place where D temperature is below -15ºC (5ºF) or above 55ºC (131ºF) as this may shorten your battery life. • The integrated battery shall not be exposed to excessive heat such as sunshine, fire or the like. • • • • • Electric-, Magnetic- and Electromagnetic Fields (EMF) 1.  oyal Philips Electronics manufactures and R sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. 2 EN Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. a When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. b Battery disposal Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Notice for the European Union Hereby, Philips Consumer Lifestyle, BG Communications, Headphones & Accessories, declares that this Philips Bluetooth stereo headset SHB5000/40723-17-16 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Trademarks Trademarks are the property of Koninklijke Philips Electronics N. V. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Koninklijke Philips Electronics N. V. is under license. Remove the integrated battery Warning •• Make sure the headset is disconnected from the USB charging cable before removing the battery. EN 3 English Disposal of your old product If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headset. 2 Your bluetooth stereo headset Congratulations on your purchase, and welcome to Philips!»» The headset is reconnected to the last connected device automatically. If the last one is not available, the headset tries to reconnect to the second last connected device. Tip •• If you turn on the mobile phone or its Bluetooth feature after turning on the headset, connect the headset from the Bluetooth menu on your mobile phone. Redial the last number. Skip backward. Press and hold 1 long beep for more than 1 second Press twice 2 short beeps Press and hold Press ●●/● Press and hold ●● Press and hold ● 1 long beep Beep at max/ min level Other status and indicators Headset status The headset is connected to a Bluetooth device, while the headset is in standby mode or while you are listening to music. The headset is on but not connected to a Bluetooth device. Indicator Blue LED flashes every 6 seconds. White LED is off. Use your headset Task Turn the headset on. Operation Press and hold for more than 1 second Sound or LED Indicator • 4 scale tones from low to high Turn the headset off. • Blue LED flashes Press and hold • 4 scale for more tones from than 4 seconds high to low • White LED flashes and goes out EN 7 English 4 Use the headset Play or pause music. Reject a call. Press Clip the headset Note •• To keep high quality of the sound, clip the headset within 20 cm from your mouth. Clip the headset for your convenience. Get the best fit 1 2 Choose the exchangeable rubber ear caps that best fit for your ear canal. Twist the earbuds to the right position for best fit and noise isolation. 8 EN • • • • • Up to 9 hours of play time or talk time Up to 200 hours of standby time Normal time for a full charge: 3 hours Rechargeable Lithium-Polymer battery (200 mAh) Bluetooth 3. 0, Bluetooth mono support (Headset Profile - HSP, Hands-Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile - A2DP; Audio Video Remote Control Profile - AVRCP) Operating range: Up to 15 meters (50 feet) Digital echo & noise reduction • • Specifications are subject to change without notice. EN 9 English 5 Technical data 6 Frequently asked questions Bluetooth headset does not switch on. Battery is low. • Charge the headset. Voice dialing or redialing does not work. Your mobile phone may not support this feature. The headset is connected to a Bluetooth stereo enabled mobile phone, but music will play on the mobile phone's speaker only. The mobile phone may have the option to listen to music via speaker or headset. • Refer to the user manual of your mobile phone on how to transfer the music to the headset. Fail to pair with a mobile phone. Bluetooth disabled. [. . . ] • Refer to the user manual of your mobile phone on how to transfer the music to the headset. Fail to pair with a mobile phone. Bluetooth disabled. • Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headset. Pairing does not work. The headset is not in pairing mode. • • Follow the steps described in this user manual. Make sure that the LED light flashes whiteand blue alternately before you release . [. . . ]