User manual PHILIPS 407421116

[. . . ] caution -- This appliance is not washable. Never immerse the appliance in water, nor rinse it under the tap. -- Only use the adapter and accessories supplied. -- Use and store the appliance at a temperature between 5°C and 35°C. [. . . ] If handled properly and according to the instructions in this user manual, the appliances are safe to use based on scientific evidence available today. Using the appliance Make sure your hair is clean and dry. Do not use the appliance on freshly washed hair. 17 4:14:03 PM English Preparing for hair clipping 1 Comb your hair with a styling comb in the direction of hair growth. Clipping with comb attachment  1 Put the small plug in the appliance and put the adapter in the wall socket. 2 Attach the comb attachment to the swivel head (‘click’). Make sure that the comb attachment locks into position properly. €“ 5 – 7 – 9 – 11 – 15 3 Turn the length setting adjustment ring to set the comb attachment to the desired setting (1-7). , , The arrowhead on the appliance indicates which setting you have selected. 7 5 3 Note:The length settings are indicated on the comb attachment. Tip: Use different settings to create a natural and smooth transition between the various hair lengths from your neckline to the top of your head. 1 Pull the comb attachment off the swivel head. Never pull at the flexible top of the comb attachment. 2 Comb the hair ends over the ears before you start to contour the hairline. 3 Push the on/off slide upwards to switch on the appliance. 4 When you shape the contours around the ears, tilt the appliance in such a way that only one edge of the cutting element touches the hair ends. 17 4:14:04 PM English 5 To contour the neckline and the sideburns, turn the appliance and make downward strokes. Note: Move the appliance slowly and smoothly. 6 Adjust the position of the swivel head to make contouring easier. Cleaning and maintenance Clean the appliance every time you have used it with the cleaning brush supplied. Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol, acetone or ethereal oils to clean the appliance. Be careful that the cutting element or comb attachment does not fall on the floor. [. . . ] 17 4:14:05 PM English 1 4 Pull the front of the cutting element upwards (1) and remove the cutting element from the appliance (2). 5 Clean the cutting element with the cleaning brush supplied. 6 Clean the inside of the appliance with the cleaning brush supplied. 2 2 1 7 Insert the lug of the cutting element into the slot (1) and push the cutting element back onto the swivel head (2). [. . . ]