User manual PHILIPS 407421716 QUICK START GUIDE

[. . . ] To enjoy using the hair clipper, we advise you to read the following information. general description (Fig. €¯1) 1 Cutting element 2 Swivel head 3 Length setting adjustment ring 4 On/off button 5 Socket for small plug 6 Charging lights 7 Regular comb attachment 8 Length setting indicator 9 Precision comb attachment 10 Protection cap of shaving head (only 407421716) 11 Shaving head with retaining frame and shaving foil (only 407421716) 12 Adapter 13 Cleaning brush 14 Storage pouch (only 407421716) Important Read this user manual carefully before you use the appliance and save it for future reference. 14 2:50:08 PM English Danger -- Make sure the adapter does not get wet. [. . . ] Using the swivel head - From its starting position of 0° (pointing forwards), you can turn the swivel head 45° or 90° to the left or right. This enables you to adjust the position of the cutting element to the part of your head that you are clipping. This makes it much easier to clip your own hair. - To set the cutting element to the desired position, turn the swivel head (‘click’). Note: Always adjust the position of the cutting element by turning the swivel head. Do not turn the cutting element or the comb attachment. Note: Do not turn the swivel head more than 90° to the left or right. 14 6:23:57 PM English -- The swivel head allows you to hold and use the appliance like a styling comb. 4 Press the on/off button to switch on the appliance. 407421716: Press the button more than 2 seconds. 5 Move the clipper through the hair slowly. Make sure that the shaving head locks into position properly. 5 Remove the protection cap from the shaving head. 6 Adjust the position of the swivel head to make shaving easier. You can do this before and/or during use. 14 2:50:14 PM English 7 Place the shaving head on your scalp and start shaving. Press the shaving head onto your scalp lightly. Note: Make sure that the shaving foil is always in full contact with your scalp. Cleaning and maintenance Clean the appliance every time you have used it by rinsing it under the tap or with the cleaning brush supplied. Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol, acetone or ethereal oils to clean the appliance. Be careful that the cutting element does not fall on the floor. Cleaning the cutting element and comb attachments 1 Switch off the appliance and disconnect it from the mains. [. . . ] 3 Store the appliance and its accessories in the storage pouch supplied. Replacement Only replace a worn or damaged cutting element with an original Philips cutting element, available from authorised Philips service centres. For an optimal shaving result, replace the shaving foil and shaving cutter once a year. To replace the shaving foil and shaving cutter: 1 Switch off the appliance and disconnect it from the mains. [. . . ]