User manual PHILIPS 40759-38-16

[. . . ] Failed descaling and storage at temperatures below 0°C. The manufacturer reserves the right to make technical changes to the product. The warning triangle indicates the instructions that are important for user's safety. Please follow these instructions carefully to avoid serious injury! [. . . ] Make sure that the ON/OFF button (2) is not pressed before connecting the machine to the power supply. Fit the plug into a wall socket with suitable power voltage. 2) - Rinse the water tank and fill it with fresh drinking water taking care not to overfill it. 1) - Insert the water tank making sure that it has properly been replaced in its former seat. Use only fresh, non-sparkling drinking water to fill the tank. Hot water, as well as any other liquid, may damage the tank. Do not turn on the machine with empty water tank: make sure there is enough water in the tank. The machine is now ready; please see related sections for operating details on how to brew coffee and dispense steam. The drip tray can be adjusted according to the cup size. 26 - 27) - Rotate the support and place it in the coffee machine. During the coffee brewing, do not remove the pressurized portafilter by manually turning it clockwise. 14) - Preheat the pressurized portafilter by switching the selection knob (17) to the " " position until some water spills out of it. This is to be done only for the first coffee brewing. When 150cc of water have flowed out, switch the selection knob (17) to the " " position in order to stop brewing. 16) - Remove the portafilter from the machine by turning it from right to left and drain any water left. There is no need to change the filter to make one or two coffees, since the machine is equipped with a special filter (11). Remove any coffee residues from the rim of the filter. 11) - Insert the portafilter (10) into the brew unit from the bottom (6). 12) - Turn the portafilter from left to right until it locks in place. Make sure that they are correctly placed under the coffee dispensing holes. When the desired quantity of coffee has been obtained, turn the selection knob (17) to the " " position in order to stop coffee brewing. Wait a few second after brewing has stopped, then remove the cups of coffee (Fig. [. . . ] Before using the accessories, we recommend washing them with water (Fig. 31-32), immerse the suction pipe in a fresh water container and eject a small quantity of steam (please refer to the related instructions). In this way, the accessories will be perfectly clean before use. To clean the cappuccinatore, suck up clean water to clean the suction pipe. [. . . ]