User manual PHILIPS 420P30

[. . . ] VIDEO 1 (AV1) CVBS B/Pb/Cb H VGA 1 VGA 2 RC-OUT RS232 ~ MAINS DVI-D Y/C S-VHS VIDEO 2 (AV2) G/Y/Y R/Pr/Cr VIDEO 3 (AV3) V Your International Philips First Choice Warranty English - GB Just a phone call away Philips' customer help desks are located worldwide. You can contact Philips Monday ­ Friday from 08. 00 ­ 20. 00 hrs Central European Time (CET) and on Saturdays and Sundays from 10. 00 to 18. 00 hrs CET. Deutsch - DE-CH-BE Nur einen Anruf entfernt Philips verfügt über Hilfstellen für den Kunden in der ganzen Welt. Sie können Philips anrufen Montags bis Freitags von 8 Uhr bis 20 Uhr zentraleuropäischer Zeit (CET) und Sonnabends und Sontags zwischen 10 Uhr und 18 Uhr (CET). Français - FR-BE-CH-LU Juste un coup de telephone Les services de consommateurs Philips sont situés partout dans le monde. Vous pouvez contacter Philips, du lundi au vendredi de 8 heures à 20 heures et le samedi et le dimanche de 10 heures à 18 heures en utilisant les numéros vert ci-dessous. Nederlands - BE-NL Een telefoontje is voldoende De Philips service desk is bereikbaar van over de gehele wereld. [. . . ] Press the cursor down until all the items are displayed. Only when the US English language has been selected (see Setup menu, Language, p. 6), the menu items will be displayed with additional icons. Brightness Contrast (Colour) (Tint) Sharpness G H C è à Colour temp. a 1 Brightness Contrast Colour Colour temp. (Tint) Sharpness Press the MENU key on the remote control to sun the main menu. G H Picture 1 menu Brightness This control allows you to adjust the brightness level of the picture. Contrast This control allows you to adjust the contrast level of the picture. Colour (only available when the source is AV1, AV2 or AV3 YCbCr) This control allows you to adjust the saturation level of the colours to suit your personal preference. Colour temperature This control allows you to select the Colour temperature of the picture. Move the cursor up/down to make a selection. Press the cursor left to return to the Picture 1 menu. Tint (only with NTSC signals and when the source is AV1 or AV2) This control allows you to compensate for the Colour variations in NTSC encoded transmissions. Sharpness This control allows you to adjust the edge definition of a picture. C @ è à VGA-mode + HD video mode 1 Pict. Sharpness G H @ à 4 SD video-mode 2 Pict. a Picture 2 menu Format (only available in 4:3 VGA mode and SD video mode) Select Format to summon a list of available display formats. Press the cursor up/down to select another display format: 4:3, Movie Expand 16:9 or Wide screen. Note: Movie Expand 16:9 is not available in VGA mode. Zoom Select Zoom On to activate the zoom function. You may also activate the zoom function with the ZOOM ON/OFF key on the remote control. If no zoom is active, press the cursor left/right, up/down to select which part of the screen will be zoomed. Zoom factor Select Zoom factor and press the cursor left/right to adjust the zoom factor and to change the magnification of the picture. If zoom is not active changing the magnification factor will have no effect on the displayed picture. Format q 4:3 Movie expand 16:9 Wide screen Zoom Z Zoom factor  VGA-mode + HD video mode 2 Pict. a (Format) Zoom Zoom factor (Shift) (Clock frequency) (Phase) (Auto align) q 4:3 Wide screen Z  < S fi X 4:3 VGA-mode SD video-mode 4:3 4:3 Shift (only available in VGA mode on VGA 1 or VGA 2 and in one of the HD modes. [. . . ] Operating the set at a higher altitude (lower air pressure), the picture becomes unstable and the picture performance is deteriorating. The plasma display might then also produce a humming sound. Bringing the set below 2000 m (local air pressure equal or above 800 hPa) it works fine again. Transportation has no influence. Control of peripheral equipment The infrared radiation of the screen may influence the reception sensitivity of other peripherals. [. . . ]