User manual PHILIPS 42FD9934S

[. . . ] cover 1017. 4 03-10-2003 11:06 Pagina 2 VIDEO 1 (AV1) CVBS B/Pb/Cb H VGA 1 VGA 2 RC-OUT RS232 ~ MAINS DVI-D Y/C S-VHS VIDEO 2 (AV2) G/Y/Y R/Pr/Cr VIDEO 3 (AV3) V 1017. 4 en 12-11-2003 11:19 Pagina 1 Unpacking and wall mounting instructions For the unpacking instructions follow the illustrated steps printed on the packaging (outside and inside). For the wall mounting instructions follow the illustrated steps ` to § printed on the separate template. Make sure that the wall mount is being fixed securely enough so that it meets safety standards. The weight of the monitor (excl. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. [. . . ] Colour temperature This control allows you to select the Colour temperature of the picture. Move the cursor up/down to make a selection. Press the cursor left to return to the Picture 1 menu. Tint (only with NTSC signals and when the source is AV1 or AV2) This control allows you to compensate for the Colour variations in NTSC encoded transmissions. Sharpness This control allows you to adjust the edge definition of a picture. C @ è à VGA-mode + HD video mode 1 Pict. Sharpness G H @ à 4 Use of the menus 1017. 4 en 12-11-2003 11:19 Pagina 5 SD video-mode 2 Pict. a Picture 2 menu Zoom Select Zoom On to activate the zoom function. You may also activate the zoom function with the ZOOM ON/OFF key on the remote control. If no zoom is active, press the cursor left/right, up/down to select which part of the screen will be zoomed. Format q 4:3 Movie expand 16:9 Wide screen Zoom Z Zoom factor  VGA-mode + HD video mode 2 Pict. a (Format) Zoom Zoom factor (Shift) (Clock frequency) (Phase) (Auto align) q 4:3 Wide screen Zoom factor Select Zoom factor and press the cursor left/right to adjust the zoom factor and to change the magnification of the picture. If zoom is not active changing the magnification factor will have no effect on the displayed picture. Z  < S fi X Format (only available in 4:3 VGA mode and SD video mode) Select Format to summon a list of available display formats. Press the cursor up/down to select another display format: 4:3, Movie Expand 16:9 or Wide screen. Note: Movie Expand 16:9 is not available in VGA mode. SD video-mode Shift (only available in VGA mode on VGA 1 or VGA 2 and in one of the HD modes. 7. ) This control allows you, when necessary, to move the picture in a horizontal or vertical way. 4:3 VGA-mode 4:3 4:3 & é Use the cursor left/right, up/down to adjust. Press the OK key when done. Wide screen Movie expand 16:9 Clock frequency (only available in VGA mode on VGA 1 or VGA 2. 7. ) This control allows you, when necessary, to adjust the values of the clock frequency so that especially text can be displayed with an optimal overall sharpness. Use the cursor left/right to adjust. Wide screen Phase (only available in VGA mode on VGA 1 or VGA 2. 7. ) This control allows you, when necessary, to adjust the pixel phase of the picture to avoid picture interference. Use the cursor left/right to adjust. Auto align (only available in VGA mode on VGA1 or VGA2 and in one of the HD modes. 7. ) This control allows you to automatically adjust the shift, the clock frequency and the phase in VGA mode and the shift in HD modes. Press OK to execute. Use of the menus 5 1017. 4 en 12-11-2003 11:19 Pagina 6 Setup menu Language Setup º Language AV3 US English Power savings ) English ( Nederlands Français Español & é " Use the cursor down to select Language. Press the cursor right to enter the list of selectable languages. [. . . ] Do you see a black screen and the indicator in front of the monitor lights up green, this means that the display mode is not supported. Switch your VGA source to a correct mode. Remote control If your monitor no longer responds to the remote control, the batteries may be exhausted. If your problem is not solved: Switch your monitor off and then on again. [. . . ]