User manual PHILIPS 42FD995499

[. . . ] Switch your computer to a correct display mode. Operation & Insert the mains plug 5 (see previous page for the illustration) supplied into the mains inlet at the back of the monitor and in the wall socket. Please, only use the supplied rim-earthed mains cord with its built-in filter. Remote control: remove the cover of the battery compartment. Insert the 2 batteries supplied (Type LR6AA-1. 5V). [. . . ] Insert the 2 batteries supplied (Type LR6AA-1. 5V). The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many countries batteries may not be disposed of with your household waste. Please check on how to dispose of batteries according to local regulations. Switch the monitor on : Press the power button B at the right side of the monitor. A green indicator lights up and the screen comes on. When the monitor does not receive a certain VGA signal the screen remains black. Make sure that your PC is switched on and is in the correct display mode. é " B 2 Use of the remote control B VGA no function FRONT no function AV1, AV2, AV3, AV4 no function FRONT o VGA OK no function B OK to activate your choice MENU AV1 p MENU to switch the menu on/off cursor keys to select your choice and to alter a selected adjustment p Picture format In VGA mode, press the p or keys to switch between a 4:3 or a 16:9 picture format. Note: In VGA display mode 850x480 you can select Wide VGA. In VGA display mode 800x450 Wide VGA is fixed. AV2 oe AV3 ¬ AV4 SMART PICTURE SOUND CONTROLS - CH/P + no function - CH/P + -V+ V press - or + to adjust the volume ¬ Mute key temporarily mute the sound or restore it SMART CONTROLS PICTURE/SOUND no function Menu & é Press the MENU key to switch the menu on. Control of peripheral equipment The infrared signals of the screen may influence the reception sensitivity of other peripherals. Solution: replace the batteries of the remote control or change position of other equipment. keep away a wireless headphone from within a radius of 1. 5 m. No stable or not synchronised VGA picture Check if you have selected the correct VGA mode in your PC (640x480, 640x400, 640x350, 856x480, 800x450, MAC II, SVGA, XGA). No picture or no sound Are the supplied cables connected properly?(The power cable to the display, the VGA cables, the audio cables, . . . ) Is your PC switched on?Do you see a black screen and the indicator in front of the monitor lights up green, this means that the display mode is not supported. Switch your VGA source to a correct mode. Remote control If your monitor no longer responds to the remote control, the batteries may be exhausted. If your problem is not solved: Switch your monitor off and then on again. [. . . ] Switch your VGA source to a correct mode. Remote control If your monitor no longer responds to the remote control, the batteries may be exhausted. If your problem is not solved: Switch your monitor off and then on again. Never attempt to repair a defective monitor yourself. [. . . ]