User manual PHILIPS 42HFL4373D

[. . . ] Register your product and get support at This information is correct at the time of press. Contents 1 Notice 2 2 Important 4 3 TV overview 6 Side controls and indicators 6 Guest remote control 7 Basic TV menus 8 Watch TV 10 Watch a connected device 12 4 Use more of your product 13 Use Teletext 13 Favourite channels 14 Use EPG 14 Use timers 15 Use locks 15 Use the TV clock 16 Use subtitles 16 Access multimedia 17 Use Scenea 18 Universal access 18 5 Set up the TV 20 Change picture and sound settings 20 Change channel settings 22 Install channels 23 Change language settings 25 Change other settings 26 Update software 27 Reinstall the TV 28 7 Connect devices 38 Back connector 38 Side connector 39 Connect a computer 39 Use a Conditional Access Module 40 Use Philips EasyLink 41 Use a Kensington lock 41 8 Product information 42 Supported display resolutions 42 Multimedia 42 Tuner/Reception/Transmission 42 Remote control 42 Power 42 Supported TV mounts 43 9 Troubleshooting 44 General TV issues 44 TV channel issues 44 Picture issues 44 Sound issues 45 HDMI connection issues 45 Computer connection issues 45 Contact us 45 Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. [. . . ] The maximum volume level of the TV can be limited in order to prevent disturbance to other guest. Setup mode should be used by Installer to make the required settings. This paragraph describes the functionality of each item in the Professional mode setup menu. Enter the next layer by pressing [OK], or [>]. Return to a previous level by pressing [<]. navigate in the current layer by pressing [^] , or [v]. Layer 1 PBS Setup Layer 2 PBS Setup menu language PBS Mode Room ID Switch on settings Layer 3 English, Français, Deutsch, Italiano Off / On #### Switch on volume Maximum volume Switch on channel Display message Welcome Message Line 1 Welcome Message Line 2 Clear Message timeout Local keyboard lock Remote control lock OSD display High security mode Welcome Logo Browse USB Auto scart Easylink Break-in Easylink control Easylink Application menu Auto USB SXP Baudrate Enable CI Slot Enable Teletext Enable MHEG Enable EPG Subtitles at startup Enable subtitles Enable Channel Map Power on Low power standby Smart power Auto switch off Delayed reboot Display Standby Display On Time Setting Time Download Download Country Download Program Time Offset Buzzer Volume Daylight saving Multi RC MyChoice Theme TV VSecure Mode Load key to USB Load key to TV Vsecure self test Program Info Layer 4 Erase key option Erase key Speaker settings TV Speaker Enable Independent Main Speaker Mute Default Main Speaker Volume <Action> <Action> <Action> Shared key, Odd key, Even key, All <Action> Off / On / EasyLink / EasyLink autostart Off / On [0. Save all made changes USB to TV TV to USB [Welcome message line 1]: [Line 1]: Sets the characters of the first line message. [Welcome message line 2]: [Line 2]: Sets the characters of the second line message. [Clear]: Erases the text stored in line 1 and line 2. [Message line 1]: Select the time that at startup the welcome message is displayed. [On]: The TV local buttons are locked, except the [POWER] button. (It is still possible to enter the PBS Setup menu using the setup RC or by pressing [3, 1, 9, 7, 5, 3, (MUTE)]). [Switch on volume] When the guest switches the TV on, it will play at the specified volume level. [Maximum volume] This option specifies the maximum allowable volume level of the TV. [Switch on channel] When the guest switches the TV on, it will play at the specified channel. This helps to personalize the hotel experience for guests. The Welcome message can consist of 2 lines of text, with each line containing a maximum of 20 alphanumeric characters. use Navigation buttons on the remote control to compose the Welcome message. Welcome message is always disabled if PBS Mode is Off [Display message]: Select to show the welcome message at power up cycle: [On] to activate, [Off] to disable [OSD display] Set this function to show or hide screen information. [High security] [Off]: Professional mode setup menu can be accessed by both Guest remote control (Press [3, 1, 9, 7, 5, 3 + (MUTE)] )and the Professional setup remote control ) [On]: Professional mode setup menu can only be accessed by the Professional setup remote control [Welcome Logo] Enables / disables to show the stored welcome Logo at start-up when TV starts up in Green Mode (see Power Settings): [On]: When set to On, the TV will show the Welcome Logo at start-up. (never use this feature without a connected STB) [Enable CI-slot] Enables or disables the use of the integrated + CI/CI slot: [Off]: No pass through of TV input signal via the CI-Slot Card is possible; use of CICard slot is not possible. [. . . ] Check that the remote control are correctly inserted according to the +/orientation. Disconnect the power cable from the power outlet. Wait until the TV cools down before reconnecting the power cable. if the blinking reoccurs , contact Philips Consumer Care. [. . . ]