User manual PHILIPS 42HFL7007D

[. . . ] Do not place your TV set under direct sunlight or heat. Leave at least 1/4" around each side of TV set for sufficient ventilation to avoid overheating. Avoid placing set where it is likely to be exposed to rain or water (e. No objects filled with liquids should be placed on top the TV in order to avoid dripping or splashing of liquids into the set. [. . . ] To select predefined picture and sound settings. For a two digit program number, enter the second digit before the dash appears. LANGUAGE (English / Espanol / Francais) When you first enter the TV SETUP menu, LANGUAGE is highlighted. Select the desired language with cursor left or cursor right. When Commercial Mode is NO, the television's Hotel Mode Menu may be accessed. The specific steps for entering Hotel Mode Menu, setting Hotel Mode to No, making changes to the consumer set and then reversing the process are as follows: 1. Using RC2573GR setup remote, enter setup menu 2. Remove AC power from set for at least 5 seconds 9. Set is now in consumer mode and changes can be made to the noncommercial settings. When finished with consumer settings, press sequence 3, 1, 9, 7, 5, 3, mute to enter "Hotel Mode Menu" 11. Set Hotel Mode to yes, scroll down and ensure PSIP** is set to desired setting. To edit, re- input the character at its position. to exit , press "M" to navigate out of the label editing field. AUTO INSTALL TV: When AUTO INSTALL TV is selected, the TV performs an automatic search for the presence of viable RF analog signals at its tuner input. channels 1 through 125 will be checked. When a viable signal is detected on a given channel, that channel is added to the channel ring. Any command from a remote control terminates the AUTO PROGRAM session. SOURCE: When DIGITAL is selected two additional entries are added to the menu to allow for mapping the digital channels. RING: Specify whether the current channel or input is to be SAVED to or DELETED from the channel ring (i. , list of channels available for selection by means of a standard guest remote control). mAJOR: This item indicates the Major cha nnel of two-part ATSC channel number if PSIP is YES in the Hotel Mode Menu. This item indicates the RF channel number if PSIP is set to NO. [. . . ] FORCED ON: The TV will turn ON whenever AC mains power is applied. This feature allows the TV's power status to be controlled, for example, from an AC mains breaker. In addition, the set cannot be put into standby with a guest remote or using the front panel power key. "VOLUME 15") during volume adjustment, by means of either the remote control, or the front panel (if it is not locked out). [. . . ]