User manual PHILIPS 42I MONITOR 42FD993299

[. . . ] 2 420mm /16, 54" & Determine desired location to mount Display Unit. Within this area, locate the two 16. 54" spaced wall studs that must be used as the Wall Bracket mounting location. 4 é With the Wall Bracket held in place, ensure it is properly leveled. Then, mark where the four holes must be drilled. 3 Note: Use only the holes in Bracket. " Remove the Wall Bracket, and using a 13/64" wood drill bit, drill the four holes. 3) ` Reposition the Wall Bracket, and with four lag bolts (fig. [. . . ] 7. V no function (except when in combination with a TV receiver box and a Home Cinema audio receiver) ¬ no function (except when in combination with a TV receiver box and a Home Cinema audio receiver) CH/PR Program selection To browse through the sources selected. AV MUTE to mute the picture or restore it (if the monitor is used in monitor mode). When activated a green indicator starts blinking in front of the monitor. Press the q button to switch between the different picture formats. On screen information When the monitor is used in the monitor mode, information about the active source (AV1, AV2, AV3, VGA1, VGA2 or DVI-D) and the supported video, VGA or HD-format of the selected source is displayed on the screen together with the selected picture format and icons informing about AV mute. Use of the remote control 5 Use of the menus and the menu system 1 Pict. a Setup º & é " Brightness Contrast (Color) (Tint) Sharpness G H Press the MENU button on the remote control to summon the different menu headers. Press the cursor left/right to move the cursor horizontally through the menu headers. Press the cursor down to access the menu. In case of a slider, move the cursor left/right to adjust. In case of a list with options, move the cursor right to enter and use the cursor up/down to select an option. Press the cursor left to leave the options list. C è à Color temp. @ ` Press the MENU button again to switch off the menu. Note: Sometimes not all the menu items are visible on the screen. 9. ) This control allows you, when necessary, to adjust the values of the clock frequency so that especially text can be displayed with an optimal overall sharpness. Use the cursor left/right to adjust. Wide screen Phase (only available in VGA mode on VGA 1 or VGA 2. 9. ) This control allows you, when necessary, to adjust the pixel phase of the picture to avoid picture interference. Use the cursor left/right to adjust. Auto align (only available in VGA mode on VGA1 or VGA2 and in one of the HD modes. 9. ) This control allows you to automatically adjust the shift, the clock frequency and the phase in VGA mode and the shift in HD modes. Press OK to execute. Use of the menus 7 Setup menu Language Setup º Language AV3 US English Power savings ) English ( Nederlands Français Español & é " Use the cursor down to select Language. Press the cursor right to enter the list of selectable languages. Use the cursor up/down to scroll through the list and to bring up other languages which are not displayed on the screen at present. Note: Only with the US English language, the menu items will be displayed with additional icons. Power savings This control allows you to overrule the automatic power savings feature. In case Power savings is switched Off, the power always remains on until the monitor is forced to standby. VGA2 § Deutsch & é Use the cursor down to select Power savings. [. . . ] It will be easier for us to notify you if necessary. MODEL # ________________________________________________ WHERE IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics Company. In countries where Philips Consumer Electronics Company does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available). SERIAL # ________________________________________________ This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. [. . . ]