User manual PHILIPS 42PF5520D 3

[. . . ] Because of the advanced technology used in your Philips Digital TV and our commitment to continually providing you with the most up-to-date product performance, we would like to highlight the following. After you turn off your TV set in a dark room, you may notice a very faint light emitted from the screen for a few minutes. This is because the TV is scanning the network for possible software updates and new services. This is normal operation and is in accordance with all stringent quality and safety standards Philips delivers. [. . . ] ç You can also watch analogue channels while recording digital channels. ` Use the o oe keys to select a setting and press É to enter into the sub-menu. Service : you can change the number of the programme you want to record. Note : it is only possible to change to a number that is in the currently selected favourite list. This menu allows you to automatically search for all the analogue programmes available in your region. & From the analogue mode , press the (TV menu) key to display the main menu. é With Cursor (oe É ) keys to select Install and then Auto Store. ` If this is not the case, the programme will be numbered in descending order strating at 99, 98, 97, etc Use the Sort menu to renumber them. Some transmitters or cable networks broadcast their own sort parameters (region, language, etc). Where this is the case, make your choice using the o oe keys and confirm with the É key. to exit or interrupt the search , press the key. If no picture is found, refer to the chapter entitled Tips on p. " Select the programme you want to move using the o oe keys and press É. ` Then use the o oe keys to select the new number and validate with Ñ. ( Repeat steps " and ` for each program you wish to renumber. This menu is used to store the programmes one at a time. é With Cursor (oe É ) keys to select Install and then Manual Store. Once a programme is found, the scanning stops and its name is displayed (when available). If you know the frequency of the required programme, this can be entered directly using the keys. if no programme is found , refer to the Tips chapter on page 20. ( Program No : enter the required number with the ÑÉ or (0 to 9) keys. § Fine Tune : if the reception is not satisfactory, adjust using the ÑÉ keys. [. . . ] Dåligt anslutna eurokablar eller antennuttag är ofta orsaken till bild- och ljudproblem (det händer att anslutningssladdarna dras ut till hälften när du flyttar eller vänder TV-apparaten). Positioning the TV For the best results, choose a position where light does not fall directly on the screen, and at some distance away from radiators or other sources of heat. Leave a space of at least 5 cm all around the TV for ventilation, making sure that curtains, cupboards etc. Cannot obstruct the air flow through the ventilation apertures. [. . . ]