User manual PHILIPS 42PF9945

[. . . ] 2264. 1 gb 19-12-2003 14:01 Pagina 1 Contents Installation Help?If this instruction manual does not give an answer or if `Tips' do not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet. Please, have the Model and Product number which you can find at the back of your television set or on the packaging, ready, before calling the Philips helpline. [. . . ] Dig natural motion Line doubling eliminates line flicker, motion compensation reduces jitter and offers smooth, yet sharp motion reproduction in movie broadcasts. Select On or Off to really see the difference in picture quality. Dynamic contrast Sets the level at which the TV automatically enhances the details in dark, middle and light areas of the picture. DNR This sets the level at which noise is measured and reduced in the picture. Colour enhancement This makes the colours more vivid and improves the resolution of details in bright colours. Hue This compensates for the colour variations in NTSC encoded transmissions. Picture format This will adjust the size of the picture dependent on the broadcast format and your preferred setting. 10 2264. 1 gb 19-12-2003 14:02 Pagina 11 Active Control The TV continuously measures and corrects all incoming signals in order to provide the best picture possible. & Press the h key on the remote control. é The Active Control menu appears. " Press the cursor up/down to select the Active Control values Off, Minimum, Medium (recommended) or Maximum. The picture settings are being optimised continuously and automatically which is displayed by bars. The menu items can not be selected. ` Press the cursor right to select Smart Picture. ( Press the cursor up/down to select one of the § Press the cursor right to select Active Display. è Press the cursor up/down to select Show bars, one of the Dual screen demos or Off. When you select Dynamic contrast, Digital Noise Reduction or Digital Natural Motion, the TV screen is divided into two parts: in the left part the selected picture quality setting is switched off; in the right part it is switched on. Note: Dependent on the input signal, one or more Dual screen demos may not be selectable. Press the h key again to switch off the Active Control menu. predefined picture settings. Sound Sound TV Smart sound Equalizer Volume Balance Loudness Headphone volume Surround mode (Dual I-II) (Mono/Stereo) (Digital/Analogue) (3D effect) AVL Delta volume & Press the cursor right to select Sound. é Select the menu items in the Sound menu with the cursor up/down and adjust the settings with the cursor left/right. Remember, control settings are at normal mid-range levels when the bar scale is centred. Smart sound Select Smart sound to display a list of predefined sound settings, each corresponding with specific factory settings of Treble and Bass. Personal refers to the personal preference settings of sound in the sound menu. Notes: - Dual X is only available with dual sound transmission. - Mono/Stereo is only selectable in case of analogue stereo transmission. - Digital/Analogue is only selectable in case of Digital transmission. Features menu Features TV Programme list Subtitle Sleeptimer Child lock On timer Zoom Off On On during mute & Press the cursor right to select Features. é Select the menu items with the cursor up/down and adjust the settings with the cursor left/right. Use the on-screen Menu-Info i for more information about the menu items. 11 2264. 1 gb 19-12-2003 14:02 Pagina 12 Programme list Press the OK key to switch over to the selected TV channel or external. [. . . ] · Are brightness, sharpness and contrast out of adjustment?Select Factory settings in the Setup, General menu, p. 8. Transport Poor Picture 20 2264. 1 gb 19-12-2003 14:02 Pagina 21 No Picture · Are the supplied cables connected properly ?(The aerial cable to the TV, the other aerial to your recorder, the VGA cables to the display, the power cables. ) · Has the child lock been switched off ? [. . . ]