User manual PHILIPS 42PF9952-12S

[. . . ] Please, have the Model and Product number which you can find at the back or the bottom of your television set or on the packaging, ready, before calling the Philips customer support service. Model: 37PF9631D/10; 42PF9952-12S/10; 50PF9631D/10; 37PF9641D/10 Product No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN Contents Safety warnings . How to navigate through the menus . . . . . . . 8 . . . . . . . 8 . . . . . . . 9 . 13 15 18 20 23 27 30 31 32 32 33 33 34 35 37 40 To make video and audio connections . [. . . ] In addition to accepting audio input via Digital Audio In, the TV can output encoded Dolby Digital audio via the DIGITAL AUDIO OUT connector to an external amplifier or receiver. If your amplifier or receiver has a matching connector for Digital Audio In, you can connect it with a single cable to the TV's DIGITAL AUDIO OUT. See To make video and audio connections, Connect a Home Cinema amplifier, p. 51. Select a Decoder channel number This allows you to define one or more channel numbers as decoder channel numbers when a decoder or a descrambler is connected to EXT1 or EXT2. Select the channel number under which you have stored the programme that comes from your decoder or descrambler. Select the input used to connect your decoder: None, EXT1 or EXT2. < Select None if you do not want the selected channel number being activated as a decoder channel number. TV menu Decoder Channel . . . . . . . . . . . . . Status Time zone Channels Preferences Connections Decoder Factory settings Software upgrade Info Installation 32 2524. 3. _en. qxd 22-03-2007 15:13 Pagina 33 Reset the Factory settings TV menu Installation Factory settings . . . . . . . . . . . . . Reset Time zone Channels Preferences Connections Decoder Factory settings Software upgrade Info EN This allows you to reset most of the predefined factory states. Press the OK key to erase settings and reset them to their default values. How to upgrade the TV software TV menu Software upgrade Current softw. Local upgrades Time zone Announcement Channels Preferences Connections Decoder Factory settings Software upgrade Info This allows you to upgrade your TV software using a USB device. Installation USB device upgrade It is possible to initiate an upgrade procedure from a USB device before you start up the TV. The memory device must be filled with the appropriate upgrade image (and structure) which can be found on the www. > The selected Favourite list will bring up a full channel list. Use the cursor up/down to select a channel. Press the OK key to check or uncheck the highlighted channel and to add it to or remove it from your selected favourite list. < Press the green colour key again to leave the Edit mode. > The modified favourite channel list appears. > With the ­P+ key you will be able to browse through the TV channels of the selected list. Press the red colour key to remove the channel list. Note: with the digit keys you can still select channels which are not marked as favourite. Favourites 1 EXT1 EXT2 HDMI A 1 Analogue channel 1 2 Digital channel 1 3 Digital channel 2 4 Radio channel 1 b4 5 Data channel 1 Exit Leave edit Press the OK key to mark / unmark. 34 2524. 3. _en. qxd 22-03-2007 15:13 Pagina 35 Create your favourite channels list (Continued) To select only TV or only radio channels on the All channels list When the All channels list is displayed or selected you may filter the list and select a list with only the TV channels or a list with only the radio channels. > The last selected channel list appears. Select the All channels list and press the cursor right. > With the ­P+ key you will be able to browse through the TV channels of the filtered list. [. . . ] 10 side connectors . . . . . . . . . . . . . . . . . . . . . . . 44 sharpness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 sleeptimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 slideshow format . . . . . . . . . . . . . . . . . . . . . [. . . ]