User manual PHILIPS 42PFL7403A

[. . . ] www. philips. com/welcome 42PFL7403A EN USER MANUAL Table of contents 1 1. 1 1. 2 1. 3 2 2. 1 3 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 3. 7 3. 8 3. 9 4 4. 1 4. 2 4. 3 4. 4 5 5. 1 5. 2 5. 3 5. 4 5. 5 5. 6 5. 7 Important . 10 Insert the remote control batteries . 11 Switch your TV on/off or to standby . 22 6 6. 1 6. 2 6. 3 6. 4 7 7. 1 7. 2 7. 3 7. 4 8 8. 1 9 9. 1 9. 2 9. 3 9. 4 Install channels . [. . . ] · Brightness Changes the light output of Ambilight. · Mode Chooses from four Ambilight modes: Colour, Relaxed, Moderate, and Dynamic. · Colour Selects a pre-defined colour setting (Warm white, Cool white, Blue, Red, Green, Yellow, Magenta, or make a custom colour of your own. D Note This option appears only after you select Mode >Colour above. 3. Press Æ to add the selected channel to the surf list. Repeat steps 1 to 3 to add more channels to the list. Press to exit. To view the a channel from the surf list 1. Press Î or ï until you find the channel. EN-19 To delete a channel from the surf list 1. Press Î or ï until you find the channel that you wish to delete. Surf 003 006 008 001 005 009 010 002 Features Timer Child Lock Parental Lock Demo* Sleep Time Start Time Stop Time Channel Activate * Available in selected models 2. Press Î or ï to select the sleep time. If set to zero minute the sleep timer is switched off. Press to activate the Sleep timer. 3. Press Æ to delete the channel. Surf 003 006 008 001 005 009 002 You can always switch off your TV earlier or reset the time during the countdown. 5. 6. 2 Automatically switch the TV on (Timer) Timer switches the TV to a specified channel at a specified time, from standby. Your TV must be in standby for the timer to work. 4. Repeat steps 1 to 3 to delete more channels from the list. Press on the remote control and select Features > Timer. Use Î or ï, Í or Æ to select and enter the menu items to set a time, start time, stop time, channel, and frequency. to exit. 5. 6 Use timers and child lock This section describes how to switch the TV on or off at a specified time and to lock or unlock the TV. Child lock is useful in preventing your children from watching non-authorised content. 5. 6. 1 Automatically switch the TV to standby (Sleep timer) Sleep timer switches the TV to standby after a defined period of time. Press on the remote control and select Features > Timer > Sleep. E Tip To switch off the timer, select Off in Features > Timer > Activate. [. . . ] Clean the remote control and TV sensor lens. · · · You receive poor picture quality from connected devices: · Check that the devices are connected properly. Also, be sure to assign devices to connectors as described in Section 7. 4 Setup devices. Verify that picture settings are correctly set. See Section 5. 3. 1 Adjust picture settings. The standby light on the TV blinks red: · Turn off the TV and unplug the mains cord. [. . . ]