User manual PHILIPS 42PFL7682D

[. . . ] www. philips. com/support Model Serial Country Austria Belgium Czech Rep Denmark Finland France Germany Greece Hungary Ireland Italy Luxemburg Netherlands Norway Poland Portugal Slovakia Spain Sweden Switzerland UK Number 0810 000205 078250145 800142840 3525 8759 09 2311 3415 0821 611655 01803 386 852 0 0800 3122 1280 0680018189 01 601 1777 840320086 40 6661 5644 0900 8407 2270 8111 0223491504 2 1359 1442 0800004537 902 888 784 08 5792 9100 0844 800 544 0870 900 9070 Tariff 0. 07/min 0. 06/min free local local 0. 09/min 0. 09/min free free local 0. 08/min local 0. 10/min local local local free 0. 10/min local local local This information is correct at the time of press. For updated information, see www. support. philips. com Recycling The packaging of this product is intended to be recycled. Apply to the local authorities for correct disposal. Product information · The model and serial number can be found at the rear of the TV and on the packaging. For a larger TV, information is also on left hand underside of the TV. Disposal of your old product Rear of TV Your product is designed and manufactured with highly quality material and components, which can be recycled and reused. [. . . ] Use the ï key to select Access restriction and press the Æ key. Press the Æ key to enter into the Conditional Access Module menu. Press button as indicated on the screen to access the CAM's functions. The Conditional Access Module (CAM) menu provides access to functions contained on the CAM. The module can be inserted into the Common Interface (CI) slot located at the backside (facing downwards) of the TV. Note This Common Interface (CI) module does not come with the TV set. It can only be obtained when you subscribe to service providers like Pay TV or other service providers. IMPORTANT Always switch the TV off before inserting or removing the module. Inserting the CAM 1 Switch off the TV. 3 4 5 6 7 8 Common Interface slot Connectors at rear of TV (facing downward) IMPORTANT If no module is inserted, or the module is not inserted properly, the Conditional Access Module menu will not be displayed. (If you have inserted a module, check that it is fully inserted in the correct manner as mentioned in step 2 above). The functions that now appear on screen are dependent on the contents of the selected Conditional Access Module in your country. Refer to the instruction supplied with the module or contact the vendor. Module 26 20 Automatic tuning of analogue programmes English 27 Auto Store Program TV 3 196 MHz This menu allows you to automatically search for all the analogue programmes available in your region. Before you automatically search for all the analogue programmes, ensure the TV is in analogue mode. If it is in digital mode, press (Analogue / Digital) key to enter the the analogue mode. 1 Press the key. IMPORTANT To exit or interrupt the search before it is completed, press the key. If you interrupt search during auto store, not all channels will be stored. For all channels to be stored, you need to do a complete auto store search again. Note ATS (Automatic Tuning System) feature If the transmitter or cable network sends the automatic sort signal, the programmes will be numbered correctly. In this case, the installation is complete. If this is not the case, you can use the Sort menu to number the programmes to your preference. ACI (Automatic Channel Installation) feature If a cable system or a TV channel which broadcasts ACI is detected, a programme list appears. Without ACI broadcast, the channels are numbered according to your language and country selection. You can use the Sort menu to renumber them. [. . . ] · Check whether SVHS cable is properly connected. · Press the P + key on the remote control to do a channel up and then press the P ­ key to do a channel down. · Change PC refresh rate to 60 Hz. S-Video colour becomes faint Black bar on top and bottom of screen in PC mode AC3 not available TV antenna cannot be powered by set key · AC3 is not supported for this set. Use the on the remote control to select an alternative audio. [. . . ]