User manual PHILIPS 45575-11-16

[. . . ] Put the cover you took off in step 5 back on. EN Put the screws (if there were any) back in and reconnect the cables. Please refer to your PC manual or contact your local dealer for more information. EN This can be found in the box: A: Your new drive B: This manual Your heating or an unpainted part of your computer case). [. . . ] You may have to unleash screws which are mostly located at the back of your computer. See your computer manual for more details. EN If you replace a drive, take it out and check which setting it has ("Master" or "Slave"). Remember this setting and go to step 10. EN If you have no drive installed, remember "Master" and go to step 10. EN If you add a drive, check the drive has which remains in the PC ("Master" or "Slave", see step 11), remember the OTHER setting. EN These are the connections (on the back of your drive) you will have to use for connecting the drive to the computer. EN Find the IDE-cable which may look like this example: A: Coloured line. EN Find a free power cable like this example. EN Connect the power cable into your drive (the edges from step 16 will be on top). EN Secure the drive with the screws (if possible on both sides). Prior to claiming a drive for warranty, you must request a return reference number at www. "The making of unauthorised copies of copy-protected material, including computer programmes, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Please inform yourself about the local separate collection system for electrical and electronic products, including those marked by following symbol. Please act according to your local rules and do not dispose of your old products with your normal household waste. To avoid danger of suffocation, keep this bag away from babies and small children. 105 rule: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Warning: Changes or modifications made to this equipment not expressly approved by Philips may void the FCC authorization to operate this equipment. 19 rule: This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device my not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]