User manual PHILIPS 46PFL7007T

[. . . ] *Available on certain models only. EN 5 English Green To select the green option or the energy-efficient settings. Blue To select the blue option or to open the Widgets*. Read more about the remote control in Help > Use your TV > Remote control > Overview (Page 15). Alternatively, find the answer in Search for. . . Press to select the next TV tour. The TV menus Yellow To select the yellow option. Let's learn more about these frequently used menus: the Home menu the Browse menu EN 6 In the Home menu , you can select the source to watch, such as a TV channel, or movies from a connected DVD player or USB flash drive. [. . . ] Press the Navigation buttons to move the slider up or down, then press OK. Audio feedback for the visually impaired This feature enables audio feedback when buttons are pressed on the remote control or TV. In the [Universal access] menu, press the blue button to select [Key beep]. Press the green button to turn on audio feedback or press the red button to turn it off. Press to exit. EN 29 English 4 Setup the TV Change picture and sound settings Settings assistant NonPu blish More picture settings NonPu blish Use the settings assistant to guide you through the picture and sound settings. Select [Setup] > [Quick picture and sound settings], then press OK. Follow the on-screen instructions to choose your preferred settings. 1. Select [Setup] > [TV settings] > [Picture], then press OK. Select a setting to adjust: [Smart picture]: Accesses pre-defined smart picture settings. [Reset]: Resets to factory default settings. [Contrast]: Adjusts the intensity of bright areas, keeping dark areas unchanged. [Standard]: Adjusts sound settings to suit most environments and types of audio. [News]: Applies sound settings ideally suited for spoken audio, such as the news. [Movie]: Applies sound settings ideally suited for movies. [Drama]: Applies sound settings ideally suited for drama. [Sports]: Applies sound settings ideally suited for sports. Press to exit. Resetting your TV to factory settings restores default picture and sound settings. Channel installation settings remain the same. Select [Setup] > [TV settings] > [Factory settings], then press OK. TV settings are reset back to the factory default. Start a TV demo NonPu blish Start a demo to find out more about your TV's features. Note: Demos are not supported on MHEG channels. Select [Setup] > [Watch demos], then press OK. [. . . ] Check that the USB storage device is compatible with the TV. Check that the audio and picture file formats are supported by the TV. Audio and picture files do not play or display smoothly: The transfer performance of the USB storage device may limit the data transfer rate to the TV, causing poor playback. PC connection issues The computer display on the TV is not stable: Check that your PC uses the supported resolution and refresh rate. Set the TV picture format to unscaled. EN 58 Overview NonPu blish Product information is subject to change without notice. [. . . ]