User manual PHILIPS 48XP43C

[. . . ] Reverse engineering or disassembly is prohibited. Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www. cinavia. com. [. . . ] You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices. • For Wi-Fi, connect a Philips Wi-Fi USB adapter (named WUB1110) to the (USB) connector on the front panel of this player. 1 2 3 4 Connect the HDMI CEC compliant devices through HDMI, and turn on the HDMI CEC operations on the TV and other connected devices (see the user manual of the TV or other devices for details). Select [On] under the options: [EasyLink], [One Touch Play] and [One Touch Standby]. »» EasyLink function is turned on. 2 Perform the network installation. 1) Press . 3) Select [Network] > [Network installation], and press OK. 4) Follow the instructions on the TV screen to complete the installation. If necessary, use the alphanumeric buttons on the remote control to enter a password. Caution •• Before you connect to a network, familiarize yourself with the network router, and networking principles. If necessary, read documentation accompanying network components. Philips is not responsible for lost, damaged or corrupt data. One Touch Play When you play a disc on this player, the TV automatically switches to the correct video input source. One Touch Standby When a connected device (for example TV) is put to standby with its own remote control, this player is put to standby automatically. 12 EN 3 Change settings This section helps you change the settings of this player. Note •• If you change a setting, make sure that the TV supports the new setting. 1 Sound D SC M NU 2 3 1 2 Watch 3D video Press . Note •• You cannot change a menu option that is grayed out. • [Parental control]: Restrict access to discs that are encoded with ratings. Input "0000" to access the restriction options. To play all discs irrespective of the rating, select level "8". • [Screen saver]: Enable or disable screen saver mode. If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode). Blu-ray discs. EN 15 4 Update software Before you update the software of this player, check the current software version: • Press , and then select [Setup] > [Advanced] > [Version information], and press OK. 3 4 5 6 Connect the USB storage device to the (USB) connector on this player. Select [Advanced] > [Software update]> [USB]. »» If an upgrade media is detected, you are prompted to start the update. Follow the instructions on the TV screen to update the software. »» When the update is complete, this player automatically turns off and on again. Caution Update software via the Internet 1 2 3 4 Connect the player to the Internet (see "Set up a network"). Select [Advanced] > [Software update]> [Network]. [. . . ] 'No entry' or 'x' sign is displayed on the TV. •• The operation is not possible. • Make sure that this player is connected to the Philips brand EasyLink TV, and the EasyLink option is turned on (see "Use your Blu-ray disc/ DVD player" > "Use Philips EasyLink"). • Make sure that this player is connected to the network (see "Use your Blu-ray disc/ DVD player" > "Set up a network"). [. . . ]