User manual PHILIPS 4HD-HI FI-LED CLK-VID CASSETTE RECORDER VR621CAT

[. . . ] Set the CH3/CH4 switch on the back of the VCR to the same channel. Set your Cable Box/DBS to the channel you want to record. When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 5 on page 34. ) Leave the Cable Box/DBS on for a timer recording. 1 Cable Signal Cable Box/DBS 2 VCR RF coaxial cable RF coaxial cable 3 TV's ANTENNA IN Jack Connections 1 2 3 Connect a Cable signal to the IN Jack on the Cable Box/DBS. Use the supplied black RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANT(enna) IN Jack on the VCR. Use a second RF coaxial cable (not supplied) to connect the OUT Jack on the VCR to the TV's ANTENNA IN Jack. Recording/Viewing Any Channel With the VCR on and in VCR position (the VCR light will appear on the display panel), set the VCR to the Cable Box/DBS output channel (03 or 04). 1 2 3 Set the TV to the same channel to which you set the VCR. [. . . ] The channel you are recording will appear on the TV screen. Press the STOP/p button to stop recording. 10 Hookups with a Stereo TV VR621CAT 1 2 OR Video Cable antenna or cable to ANT(enna) IN Jack VIDEO (yellow) and AUDIO (red and white) OUT Jacks Audio and Video IN Jacks on TV 3 VR421CAT ANT IN AUDIO Stereo Audio Cable 1 OUT IN CH3 CH4 antenna or cable to ANT(enna) IN Jack OUT VIDEO VIDEO (yellow) and AUDIO (white) OUT Jacks 2 Video Cable Audio and Video IN Jacks on TV 3 q Audio and Video cables are not supplied. "Y" splitter Audio Cable If you have the VR621CAT, connect a stereo audio cable to the red and white AUDIO OUT Jacks on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jacks on your TV. If you have the VR421CAT, connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV. If your TV has Right and Left AUDIO IN Jacks, you must use a "Y" splitter audio cable as illustrated to deliver audio to the TV's right and left channels. This hookup will not give you stereo sound. To get stereo sound, use the connections on pages six - seven and select the channel to be viewed at the TV (with the VCR turned off). 1 2 3 4 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV. Turn on your TV, making sure it is in Line Input mode. This might be referred to as the TV's Audio/Video In channel or the Auxiliary In channel. Please refer to your TV owner's manual for details. Front Panel 27 F. FWD (Fast Forward) Button When playback is stopped, press to fast forward the tape at high speed. Press repeatedly to start a One-Touch Recording. PAUSE Button While recording, press to pause the recording. You can not pause a One-Touch Recording. During tape playback, press to freeze the picture. STATUS/EXIT Button Press to access or remove the on-screen status display. Press to exit on-screen menus. 28 Rear Panel ANT(enna) IN Jack Connect your antenna or cable here. AUDIO IN Jack(s) Connect audio cables coming from the AUDIO OUT Jacks of a camcorder, another VCR, or an audio source here. If you connect other equipment to the AUDIO and VIDEO IN jacks on the back of the VCR, select channel 001 (AV REAR) at the VCR. This allows you to view or hear the materials playing on the other equipment. The VR421CAT has only one AUDIO IN jack. AUDIO OUT Jack(s) Connect audio cables going to the AUDIO IN Jacks of a camcorder, another VCR, or an audio system here. The VR421CAT has only one AUDIO OUT jack. AUDIO L OUT R VIDEO IN ANT IN OUT CH4 OUT IN CH3 VIDEO OUT Jack Connect a video cable going to the VIDEO IN Jack of a camcorder, another VCR, or an audio-visual system (monitor, laser disc player, video disc player, etc. ) here. [. . . ] Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2 q Audio and Video cables are not supplied. 3. RF coaxial cable from the OUT jack of VCR 2 to the TV's ANTENNA IN Jack 1 2 3 4 5 Make the connections shown above. VCR 1 will play your tape. Put a prerecorded tape in VCR 1. Helpful Hints · If you use the AUDIO and VIDEO IN Jacks on the back of VCR 2, press Number buttons 0, 0, 1. Details are on page 46. ) · If you use the AUDIO and VIDEO In Jacks on the front of VCR 2, press Number buttons 0, 0, 2. [. . . ]