User manual PHILIPS 50-DLP-PROJECTION HDTV PIXEL PLUS 50PL9200D

[. . . ] User Manual Manuel de l'utilisateur Guía del usuario 50PL9200D 60PL9200D A RRÊT Philips vous remercie de votre confiance. Gracias por escoger Philips Besoin d'une aide rapide? O!Guía de Uso Rápido Incluida! For Customer Use / À l'usage du client / Para Uso del Cliente AE: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. [. . . ] See section on Digital Surround Receiver. Clock This allows you to use your TV as a clock. - Adjusting the clock is necessary for the correct working of Lock after features. (See section on TV settings, under Channels menu) - Closed captioning will not be displayed when the clock is being displayed. Press the clock button again to switch off the clock if you want to see closed caption. Auto clock mode & Select Clock in the Setup menu. é Press the cursor right button to select the Auto clock mode. " Press the cursor right button to instruct the TV to get the time automatically or manually. Auto clock channel (only available when Auto clock mode is set to Automatic) With the cursor buttons, select the channel number where time can be found by the TV. Typically time can be found on PBS as well as some other channels. Note: If Manual has been selected in the Auto clock mode, the Auto clock channel menu item can not be selected. Time - Day (only available when Auto clock mode is set to Manual) With the cursor buttons, select and enter the correct time and day. If Auto clock mode Manual has been selected, and no clock search has been done, the system will retain the entered time and day. Time zone (only available when Auto clock mode is set to Automatic) This function allows you to select your local time zone. Broadcast time information will auto correct the clock display for your local time. & Select Time zone with the cursor down button. é Press the cursor right button to select your local time zone. Daylight saving (only available when Auto clock mode is set to Automatic) Daylight saving time is automatically set by specially broadcast signals. This menu item allows you to disable the automatic setting of daylight saving time. This is useful if you live in an area or state where daylight saving is not applied, but you receive channels from other areas where daylight saving signals are broadcast. & Select Daylight saving with the cursor down button. é Press the cursor right button to select Automatic for automatic clock correction for daylight saving time, based on specially broadcast signals. " Select Off to disable automatic clock correction based on the specially broadcast signals. Settings Setup Preferences Source Clock Convergence 4 Clock Auto clock mide Auto clock channel Time Day Time zone Daylight saving 6 Most of the TV channels do not transmit clock information. There are a few cable channels that do but they are at the end of the channel ring. [. . . ] Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay. WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS: This Limited Warranty applies only to the new products manufactured by or for Philips that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. [. . . ]