User manual PHILIPS 50-WXGA PLASMA MONITOR BDH5011-74B

[. . . ] Philips Business Solutions E G I S F User Manual Benützersanleitung Guida Utente Manual de uso Manuel de l'utilisateur TYPE NR. BDH5011 User Manual BDH5011 Table of Contents 1. UNDERSTANDING YOUR DISPLAY 6. 1 Front View . . 15 7. 2 Connecting a HDTV Decoder Set-Top Box . . 19 7. 6 RS-232 Remote Control Connections . [. . . ] Picture-In-Picture (PIP) / Side-by-Side Picture (POP). POP (4:3) Mode will preserve 4:3 aspect ratio for both images displayed in the POP windows. POP (16:9) Mode will preserve 16:9 aspect ratio for both images displayed in the POP windows. All PIP and POP related settings are also accessible using the on-screen Menu display. Please see next pages for details. Swapping Main Picture Sub Picture Main Picture Sub Picture 29 User Manual BDH5011 Picture-In-Picture (PIP) / Side-bySide Picture (POP) - Con't Notes: · PIP mode can only be turned on if the display's input is set to: AV, S-Video, Component 1 and 2. If the displays main input is set to RGB or DVI, the PIP and POP will not function. · If the displays input is set to Component 1 or Component 2, the PIP will only turn on if the input signal source is compatible with 15KHz signals such as 480i and Y/CB/CR signals. · When changing input source for sub-pictures to Component 1 and Component 2, only 15KHz compatible signals such as 480i and Y/CB/CR will result in a video picture display. The input source selection will not be available if a signal other than 480i or Y/CB/CR is detected. · Once PIP is turned off, the next time you return on PIP mode, the position of the subwindow will start at default position. Accessing PIP and POP Modes Modes using OSD You can also use the OSD menu to access the same PIP and POP mode functions. To access these modes using OSD: 1. Press the MENU +/- keys on the remote or the front control panel. Use the ADJ +/- keys to switch to `PIP/POP' Menu. Make sure that the `Picturel' OSD menu below is displayed. Use the MENU +/- keys to move up and down to choose the sub-category you wish to change. Use the ADJ +/- keys to actually change the setting. Choose between FIXED or VARIABLE windows position. If set to FIXED, the PIP window can be set in any one of the four corners of the screen. Use H-LOCATION and V-LOCATION to set the position of the window. If set to VARIABLE, the PIP window can be variably set to anywhere on the screen using H-LOCATION and V-LOCATION. 30 User Manual BDH5011 PIP Window SWAP 1. By default, the OSD will always display DISABLE. To swap the main and sub windows, use the ADJ +/- key to switch to ENABLE. Once the swap is complete, the OSD will return to display DISABLE. When POP (Side-by-side) picture is turned on, you can change the aspect ratio for the image displayed. [. . . ] Improperly connected source signal cable. Improperly connected source signal cable. 2. Can hear sound, but no picture Can see picture but no sound is heard . 1. 1. Make sure that both video inputs and sound inputs are correctly connected. [. . . ]