User manual PHILIPS 50MF231D-37B

[. . . ] 50MF231D 50" Plasma HDTV 50" Plasma TV Haute Définition 50" Plasma TV Alta Definición : : Español Française English IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] " Press the OK button to erase settings and reset them to their default values. - 12 Source This menu allows you to name/label the accessory devices you have connected to the external inputs/outputs. & Select Source in the Setup menu. é Press the cursor right to enter the list of types of devices connected to the selected input. " Select the accessory device with the cursor up/down. When you select AV1, AV2, AV3, HDMI, Side or Analog Audio In, a list appears allowing you to identify which type of accessory device is attached to this input. The TV detects the presence of the connected device and the signal is routed appropriately. Clock This allows you to use your TV as a clock. Note: - Adjusting the clock is necessary for the correct working of Lock after (See TV settings, Channels, p. - Closed captioning will not be displayed when the clock is being displayed. Press the clock key again to switch off the clock if you want to see closed caption. Auto clock mode & Select Clock in the Setup menu. é Press the cursor right to select the Auto clock mode. " Press the cursor right to instruct the TV to get the time automatically or manually. Auto clock channel (only available when Auto clock mode is set to Automatic) With the cursor buttons, select the channel number where time can be found by the TV. Typically time can be found on PBS as well as some other channels. Note: If Manual has been selected in the Auto clock mode, the Auto clock channel menu item can not be selected. Time - Day (only available when Auto clock mode is set to Manual) With the cursor buttons, select and enter the correct time and day. If Auto clock mode Manual has been selected, and no clock search has been done, the system will keep the entered time and day. Most of the TV channels do not transmit clock information. There are a few cable channels who do but they are at the end of the channel ring. There is no clock transmission in antenna channels. In such cases, either clock extraction takes a long time, or there is no clock. Time zone (only available when Auto clock mode is set to Automatic) This function allows you to select your local time zone. Broadcasted time information will correct the clock display for your local time. & Select Time zone with the cursor down. [. . . ] Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty. Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay. WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS: This Limited Warranty applies only to the new products manufactured by or for Magnavox that can be identified by the trademark, trade name, or logo affixed to it. [. . . ]