User manual PHILIPS 50MF231DB

[. . . ] Do not block any of the ventilation openings. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. [. . . ] As your home will likely not be as well lit as a store, we recommend that you cycle through the various auto picture modes to find the one that best suits your own viewing conditions. most consumers will find that Natural is the correct choice. Contrast This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged. Brightness This will adjust the light output of the complete picture, which will mainly affect the darker areas of the picture. Color This will adjust the saturation level of the colors to suit your personal preference. Select Cool to give the white colors a blue, Normal to give the white colors a neutral, Warm to give the white colors a red tint. é Press the cursor right to enter the sound menu. " Select the menu items with the cursor up/down and adjust the settings with the Balance This will adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position. Auto sound Select Auto sound to display a list of predefined sound settings, each corresponding with specific factory settings of Treble and Bass. Personal refers to the personal preference settings of sound in the sound menu. Note: The moment you are in a predefined Auto sound setting and you modify a setting in the Sound menu, all values of the menu will overwrite the previously made personal setting. Remember, control settings are at normal mid-range levels when the bar scale is entered. Headphone volume This controls the level of sound through the headphones. Sound mode This selects the modes for stereo or surround sound reproduction dependent on the broadcast signals or signals from external inputs received. Alternate audio (only selectable with analog broadcast signals) This gives you the possibility to swap between the Main and Second audio Program (SAP) when it is available. Digital Audio language (only selectable with digital broadcast signals) This allows you to select your language preference in case of multilingual audio track programs if available with digital broadcast signal. note: The default language for the digital channels is the installed menu language. Mono/Stereo This selects, per TV channel, Mono or Stereo sound when analog stereo broadcasts are available. AVL (Automatic Volume Leveler) (only available with analog broadcast and nonDigital signals) This automatically reduces the volume differences between channels and programs, providing a more constant overall level. this will also reduce the dynamics of sound. Delta volume This allows you to correct for any permanent volume differences between TV channels or external sources. " Select the menu items with the cursor up/down and adjust the settings with the Closed captions This displays the transmitted CC- or CS-text on the screen according to your chosen CC or CS service in the Setup, Features preferences menu, p. [. . . ] note: Only FAT/DOS-formatted portable memory is supported. New software can be obtained from your dealer or can be downloaded from the www. Com/support using the web browser on your PC. Before starting the software upgrade procedure, it is advised to check what the current TV software is. [. . . ]