User manual PHILIPS 50PF9964

[. . . ] Model: FTR 9965/12 Product No: AG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Your remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Keys in front of the TV receiver box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 18 Connect Peripheral Equipment There is a wide range of audio and video equipment that can be connected to your receiver. The following connection diagrams show you how to connect them. Note: In case of the monitor in a stand alone situation without the receiver box connected, see the instructions with the monitor. Note: EXT1 can handle CVBS and RGB, EXT2 CVBS, Y/C and RGB, EXT3 and 4 CVBS, EXT5 Y-Pb-Br. It is preferred to connect peripherals with RGB output to EXT1 or EXT2 as RGB provides a better picture quality. Note: If your recorder is provided with the EasyLink function, it should be connected to EXT2 to benefit from the EasyLink functionality. Recorder (VCR-DVD+RW) Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals out of the display. Keep a minimum distance of 0, 5 m to the screen. Connect the aerial cables 1, 2 and, to obtain the optimum picture quality, eurocable 3 as shown. If your recorder does not have a euroconnector, the only possible CABLE connection is via the aerial cable. You will therefore need to tune in your recorder's test signal and assign it programme number 0 EXTERNAL or store the test signal under a programme number between 90 2 and 99, see Manual installation, p. 2 1 See the handbook of your recorder. 3 4 VCR 1 DECODER Decoder and Recorder Connect a eurocable 4 to your decoder and to the special euroconnector of your recorder. You can also connect your decoder directly to EXT1 or 2 with a eurocable. Other equipment (satellite receiver, decoder, DVD, games, etc. ) & Connect the aerial cables 1, 2 and 3 as shown (only if your EXTERNAL CABLE 12 1 4 2 3 5 peripheral has TV aerial in-/output). ` Select one of the menu items with the cursor up/down. Picture 2 Sound Setup See the separate booklet supplied with the monitor. Picture 1 Brightness Contrast Colour temperature Sharpness Picture 2 Format Zoom Zoom factor Shift Clock frequency Phase Auto align Sound (Volume) (Bass) (Treble) (Sound mode) Setup Language (Power savings) (AV3) (VGA2) ( Press the cursor left/right to alter the selected adjustment. § Press the MENU key again to switch off the VGA menu. Recorder or DVD with EasyLink The recorder (VCR or DVD+RW) or DVD can be operated with the remote control via the Recorder or DVD menu on screen. Recorder Ò p Rwd Play DVD Òp Prev. Play Stop Play Ï Next Eject Stop Play Ffw ® Ï Rec Eject & Press the MENU key on the remote control. é Select the Recorder or DVD menu with the cursor up/down. " Press the cursor left/right, up/down to select one of the recorder or DVD functions. The key ® for recording can be operated in the TV mode. If your EasyLink recorder has the system standby function, when you press the B key for 3 seconds, both TV and the recorder are switched to standby. 21 Audio- and video equipment keys Most of the audio and video equipment from the Philips range of products can be operated with the remote control of your TV. Press the Select key to operate any of the equipment indicated in the display. Another device can be selected by pressing Select repeatedly within 2 seconds. The led will blink slowly to indicate the device. Press one of the keys on the remote control to operate the peripheral equipment. [. . . ] It is within industry standards that very few pixels (< 0. 001%) may be defective, even for a new set. There is however no reason to doubt about the quality of the set. The plasma display technology operates with rare gases which are being influenced by air pressure. Up to an altitude of 2000m above sea-level (local air pressure equal or above 800 hPa), the display is functioning fine. [. . . ]