User manual PHILIPS 51-PROJECTION HDTV 51PP9910

[. . . ] User Manual SET-UP AND BASIC GUIDE HDTV 51PP9910 55PP9910 Thank you for choosing Philips. Need help fast? Read your User Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance you may access our online help at www. p4c. philips. com or call 1-800-531-0039 while with your product. 3/24/04 3135 035 22222 PANEL INDEX SUBJECT Panel # SUBJECT Panel # 1-2-3 HDTV 1 Getting Connected . . 10 HDTV Boot Camp Analog versus Digital . [. . . ] Yellow 15 HDTV BOOT CAMP Connections and Jacks Antenna RF Jack Cable Used: RF Coaxial (75) TUNER Tuner (RF) Input Jack Cables used: RF coaxial cable (75) Allows you to connect an antenna, cable TV, or components having RF outputs to the antenna input on the TV. Signal Splitter Allows you to route an antenna or cable TV signal to two inputs. Signal Splitter Cables Used: RF Coaxial (75) 300- to 75-ohm Twin-lead Adapter Accepts twin-lead wires from an antenna and allows connection to the antenna input on the TV. If your antenna is already equipped with an RF coaxial cable you will not need this adapter. 300- to 75-ohm Twin-lead Adapter TUNER Analog and Digital Audio Jacks (Red and White, Orange) Cables used:Audio with RCA-type phono plugs for analog and Coaxial Digtial SPDIF for digital. Provide sound for the video inputs. If your accessory device has only one output for audio, connect it to the left (color coded white) audio jack on the TV. Audio Jacks Cables Used: Audio with RCA-type Phono Plugs R L Audio Jacks Cables Used: Coaxial Digital Audio (SPDIF) COAX Red White Orange 16 Antenna Connect an antenna to this jack. The TV can receive Digital and Analog broadcast signals. Cable Connect the Coaxial cable to this jack. The TV can receive Digital and Analog cable signals. Digital Audio Out Connect a digital audio device to this Jack. AV3 This includes component video (Y, Pb, Pr or RGB), HV Sync, and, audio jacks. AV1 This includes an S-Video, Video, and audio jacks. Use this to connect a VCR. HDTV BOOT CAMP Connections AV5 This includes an HDMI jack to connect an HDMI device. You can also use a DVI to HDMI converter along with the left/right audio jacks to connect a DVI device. . AV4 This includes component video (Y, Pb, Pr or RGB) and audio jacks. AV2 This includes an SVideo, Video, and audio jacks. Use this to connect a Personal Video Recorder. ANALOG AUDIO OUT Connect an analog audio device to these jacks. Input Signal Compatibility: AV1 . HDMI (DVI with a converter) Antenna/ NTSC, ATSC, QAM Cable . (480i, 480p, 720p, 1080i) 17 U CONNECTING YOUR DEVICES AV1 ANALOG se AVI for any device which uses a composite video or S-Video connec- tion. Optimized for: VCR Other Options: Cable Box, DVD, etc. . . Refer to the directions-for-use manual for your device for further information on connections. 1 2 Connect the VIDEO OUT jack or S-Video jack on the rear of the device to the INPUT AV1 VIDEO or S-VIDEO jack on the rear of the TV. Connect the audio output R(ight) and L(eft) jacks on the rear of the device to the AV 1 AUDIO jacks on the rear of the TV. NOTE: If the device is a mono (nonstereo) unit, connect only the left audio cable, which usually has a white connector. You will also need to select MONO in AUDIO menu, see panel 12 in the Advanced Instructions. 3 Press the AV button on the remote control to open the AV Source menu. [. . . ] S-Video Input · Signal input that allows direct connection of high-resolution video sources, such as a satellite receiver, DVD player, S (Super)-VHS videocassette recorder, or video games. Provides improved picture resolution, sharpness, and clarity. Twin­lead Wire · The more commonly used name for the two-strand, PHILIPS LIMITED WARRANTY One (1) Year Labor & One (1) Year Parts & Two (2) Years Display Repair PHILIPS CONSUMER ELECTRONICS warrants this product against defect in material or workmanship, subject to any conditions set forth as follows: PROOF OF PURCHASE: You must have proof of the date of purchase to receive warranted repair on the product. A sales receipt or other document showing the product and the date that you purchased the product as well as the authorized retail included, is considered such proof. [. . . ]