User manual PHILIPS 53030-48-16

[. . . ] The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set. •• Do not expose the phone to excessive heat caused by heating equipment or direct sunlight. •• Do not drop your phone or allow objects to fall on your phone. [. . . ] »» The call log list is displayed. Enter the information, then tap [Save] to confirm. »» The record is saved. Delete a call record 1 2 3 4 5 Tap from the main menu screen to access the call log lists. Tap the drop-down menu to select a call log list from the landline or mobile line. »» The call log list is displayed. Select one or multiple call records, then tap [Delete] to confirm. »» The selected records are deleted. Tip •• If you select [Delete all], a confirmation request is displayed. Tap [Yes] to delete all records. Return a call 1 2 3 4 Tap from the main menu screen to access the call log. Tap the drop-down menu to select a contact list from the landline/mobile line. »» The call log is displayed. »» The number is dialed. Tip •• You can set the phone to automatically select a line for you, or to always make a call using a certain line (see 'Line settings' on page 35). »» The current message is deleted. Delete all old incoming messages Incoming messages Each message can be up to 3 minutes long. When you receive new messages, the new message indicator flashes on the answering machine and a confirmation request is displayed on the handset. Note •• If you pick up the phone when the caller leaves a message, the recording stops and you can talk to the caller directly. 1 2 3 Tap from the main menu screen. Select [Delete all]. »» The handset displays a confirmation request. »» All old messages are permanently deleted. Note •• You can only delete the read messages. No deleted messages can be recovered. Note •• If the memory is full, the answering machine switches to [Answer only] automatically. Delete old messages to receive new ones. Call screening You can hear the caller while he is leaving a message. Press to answer the call. 28 EN You can adjust the sound quality of the messages received from the answering machine. 1 2 3 Tap from the main menu screen. Select [Message quality]. »» The setting is saved. Note You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your 4-digit PIN code. Note •• The remote access PIN code is the same as your system PIN. The preset PIN is 0000. •• The sound quality can only be adjusted before •• Depending on the sound quality, the maximum recording starts. number/length of recorded messages changes. [. . . ] You must use the Software in accordance with all applicable export laws, regulations and statutes. You agree that neither you nor your licensees (if any) intend to or will, directly or indirectly, export or transmit the Software to any country in violation of. Use of the Software and any corresponding documentation, if any, is provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of The Rights in Technical Data and Computer Software clause at DFARS 252. 227-7013 or subparagraphs (c)(l) and (2) of the Commercial Computer Software-Restricted Rights at 48 CFR 52. 227-19, as applicable. [. . . ]