User manual PHILIPS 55520-31-16

[. . . ] If damaged, the power cord must be replaced by the manufacturer or its customer service centre. Do not run the cord around sharp corners and edges as well as on hot objects and keep it away from oil. Do not use the power cord to carry or pull the coffee machine. Do not unplug the machine by pulling the power cord or touch the plug with wet hands. [. . . ] Coffee/Water light - "Machine ready" Steam ready light Selection knob Before cleaning the machine, disconnect it by pressing the ON/OFF button, then pull out the plug from the socket. It is strictly forbidden to tamper with the internal parts of the machine. Water left in the tank for several days should not be water. To ensure that the coffee machine works properly and The original packaging has been designed to protect the machine during transport. We recommend keeping the packaging for future transport. Before installing the machine, read the following safety instructions carefully. The coffee machine is now ready to be connected to the power supply. The drip tray can be adjusted according to the cup size. 26 - 27) - Rotate the support and place it in the coffee machine. They have not been used for a certain period of time. Faulty cords and plugs must be immediately replaced by authorized service centres. In order to do this, please: - Remove the external part of the Pannarello (for standard cleaning). - Wash the upper part of the Pannarello with fresh drinking water. - Wash the steam spout with a wet cloth and remove any milk residue. - Replace the upper part of the steam spout (make sure it is completely inserted). 17) - Perform the following operations to clean the - (Fig. Not possible, prime the circuit as explained in The same procedure can be used to heat other beverages. It is necessary to descale the machine every 1-2 months of use and/or when you notice a reduction in the water delivery. 20) - Immerse the steam spout in the milk and open the knob (4) by turning it anticlockwise. Turn the milk container with slow upward movements so that it warms up evenly. If both lights are on and the machine has reached a too high temperature to brew coffee, prime the circuit as described in section 4. 3) - During each interval disconnect the machine by pressing the ON/OFF button (2) in order to let the descaling solution take effect for about 10-15 minutes. [. . . ] Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling household waste disposal service or the shop where you purchased the product. Machine not connected to the power supply. [. . . ]