User manual PHILIPS 555224816

[. . . ] Allow to cool before putting on or taking off parts, and before cleaning the appliance. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. [. . . ] Now the the machine is ready for brewing coffee. Note: When you haven’t used the machine for 2 or more weeks, the machine will automatically perform an automatic rinse/self-cleaning cycle after you switch it on. Thereafter you need to initiate the manual rinse cycle as described above. The automatic rinse/self-cleaning cycle is also initiated automatically when starting up the machine (with cold boiler), when the machine is preparing to go into stand-by mode, or you have pressed the “ ” button (after a coffee has been brewed). ENGLISH 13 “INTENZA+” WATER FILTER INSTALLATION We recommend you to install the “INTENZA+” water filter as this prevents lime scale to build up in your machine and preserves a more intense aroma to your espresso coffee. You can purchase separately the INTENZA+ water filter. Please refer to the maintenance products page in this user manual for further details. Water is a crucial part of every espresso, so it’s most important to always have it professionally filtered. Using the “INTENZA+” water filter will prevent mineral deposits from building up and improve your water quality. 1 Remove the small white filter from the water tank and store it in a dry place. 2 Remove the “INTENZA+” water filter from its packaging, immerse it vertically (with the opening positioned upwards) in cold water and gently press the sides so as to let the air bubbles out. 3 Set the filter according to the water hardness of the area where you live. These settings are specified on the filter package. A = Soft water B = Hard water (standard) C = Very hard water 4 Put the filter into the empty water tank. Press it until it cannot move further down. 14 ENGLISH 5 Fill the water tank with fresh water and reinsert it into the machine. Write down the date of the next water filter replacement (+ 2 months). 6 Dispense the entire water tank by using the hot water function (see chapter “Hot water dispensing”). 7 Fill the water tank again. ADJUSTMENTS The machine allows for certain adjustments so that you can brew the best tasting coffee possible. Saeco Adapting System Coffee is a natural product and its characteristics may change according to its origin, blend and roast. The machine is equipped with a self-adjusting system that allows the use of all types of coffee beans available on the market (not for caramelized beans). Dispensing may be preceded by small jets of hot water. The hot water/steam wand may reach high temperatures. Use the appropriate protective handle only. 1 Fill 1/3 of a container with cold milk. Note: Use cold (~5°C / 41°F) milk with a protein content of at least 3% to ensure optimum results when preparing a cappuccino. You can use whole milk or low-fat milk depending on your personal taste. 2 Immerse the Pannarello in milk. 3 Press the “ ” button. 20 ENGLISH 4 The machine warms-up and the “ button turns off. The “ ” 5 When the “ ” button turns on again, the steam dispensing starts. 6 Froth the milk by gently swirling the container and moving it up and down. 7 When the milk froth has the desired consistency, press “ stop dispensing steam. ” button to Caution: After frothing the milk, clean the Pannarello by dispensing a small amount of hot water into a container. For detailed cleaning instructions please see the “Cleaning and Maintenance” chapter. Note: After dispensing steam, it is possible to brew an espresso or dispense hot water straight after. ENGLISH 21 HOT WATER DISPENSING Warning: Danger of scalding!Dispensing may be preceded by small jets of hot water. The hot water/steam wand may reach high temperatures: never touch it with bare hands. Use the appropriate protective handle only. ”, “ Before dispensing hot water, check that the “ are shining steadily and the water tank is filled. ”, “ ”, “ ” lights 1 Place a container under the Pannarello. 2 Press the “ ” button to start dispensing hot water. 3 The machine warms-up and the “ button turns off. ”“ ” buttons flash. [. . . ] It may be necessary to change the type of coffee or the coffee grinder settings. Fill the water tank and prime the circuit (chapter "Using the machine for the first time"). Clean the brew group ("Weekly cleaning fo the brew group" chapter). Prime the circuit (chapter "Using the Machine of the First Time"). [. . . ]