User manual PHILIPS 55PP9910 1

[. . . ] Read your User Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance you may access our online help at While with your product. He guide can provide you with information about the current program as well as upcoming programs. If the broadcaster or cable company is providing it, information about the current program and programs throughout the day are displayed. [. . . ] Selected as a DIG AUDIO OUT when digital signals are broadcasting in Dolby Digital. Ecause broadcasters and cable companies are transitioning to Digital TV they may broadcast digital channels at certain times or they may reorganize channels without notice. To make sure you do not miss a channel, Philips has developed Intellitune. When the TV is OFF (standby mode) it will search for previously unprogrammed channels and add them to the channel list. Mart Picture allows you to choose a preset picture setting for each Antenna, Cable and AV input. He Sleeptimer feature allows you to set a timer to automatically switch the TV off after a period of time that you choose--15, 30, 45, 60, 90, 120, 180, or 240 minutes. Ou can set the Timer to switch to a selected channel at a specific time while you are watching another channel, or when the TV is in standby mode. You can also set the TV to turn off at some time after the TV switches channels. Then press the CUROSR DOWN button until TIMER is highlighted. Then press the CURSOR DOWN button once to highlight the START TIME control. press the CURSOR RIGHT button to highlight the time indicator area. Press the NUMBER buttons to enter the correct time. If you make a mistake entering the time, use the CURSOR LEFT or RIGHT button to move among the time input slots to make corrections. NOTE: You can also use the CURSOR BUTTON UP or DOWN to cycle through digits to input the time. If you want the TV to switch off at some time after the changing of channels, follow steps 5­7 above to set the STOP TIME. Ollow these steps to select the channel to which the Timer will switch the TV. Then press the CUROSR DOWN button until TIMER is highlighted. Then press the CURSOR DOWN button repeatedly until the CHANNEL control is highlighted. press the NUMBER buttons to enter the desired startup channel. Or press the CURSOR RIGHT button repeatedly to enter the start-up channel you want. NOTE: Before the Timer will work, you must activate it. Fter you have set the TIME, START TIME, STOP TIME, and CHANNEL, you must activate the Timer for it to operate. [. . . ] However, using the WEAK DIG SIGNAL feature you can add those channels with weak signals to your channel list. Then press the CURSOR DOWN button repeatedly until INSTALL is highlighted. press the CURSOR RIGHT button to enter the INSTALL submenu. Then press the CURSOR DOWN button repeatedly until WEAK DIG SIG is selected. [. . . ]