User manual PHILIPS 56330-30-16

[. . . ] PowerSensorTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5. Technical Specifications . . . . . . . . . . . . . . . . . . . . . . 18 5. 1 Resolution & Preset Modes. . . . . . . . . . . . . . . . . . . 20 6. Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7. Regulatory Information . . . . . . . . . . . . . . . . . . . . . . 22 8. [. . . ] If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: 227E3Q: Power Management Definition VESA Mode Active Sleep Switch Off Video H-sync V-sync ON OFF OFF Yes No Yes No Power Used < 29. 2 W (typ. ) < 0. 5 W (typ. ) < 0. 5 W (typ. ) LED Color White White (blink) OFF 227E3QPH: Power Management Definition VESA Mode Active Sleep Switch Off Video H-sync V-sync ON OFF OFF Yes No Yes No Power Used < 29. 2 W (typ. ) < 0. 5 W (typ. ) < 0. 3 W (typ. ) LED Color White White (blink) OFF The following setup is used to measure power consumption on this monitor. v v v v Native resolution: 1920 x 1080 Contrast: 50% Brightness: 250 nits Color temperature: 6500k with full white pattern Note This data is subject to change without notice. 21 7. Regulatory Information Lead-free Product Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community's stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle. This display is designed for both you and the planet The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on the climate and our natural environment. TCO Certified is a third party verified program, where every product model is tested by an accredited impartial test laboratory. TCO Certified represents one of the toughest certifications for displays worldwide. Some of the Usability features of the TCO Certified for displays: v Visual ergonomics for good image quality is tested to ensure top performance and reduce sight and strain problems. The product also comply with the following standards v ISO9241-307:2008 (Ergonomic requirement, Analysis and compliance test methods for electronic visual displays). prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display). MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields). TCO CERTIFIED (Requirement for Environment Labeling of Ergonomics, Energy, Ecology and Emission, TCO: Swedish Confederation of Professional Employees) for TCO versions. v v v v 23 7. Regulatory Infomation Energy Star Declaration (www. energystar. gov) As an ENERGY STAR® Partner, we have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Note We recommend you switch off the monitor when it is not in use for a long time. Federal Communications Commission (FCC) Notice (U. S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Ans. : Yes, you can change your color setting through OSD control as the following procedures, v v Press "OK" to show the OSD (On Screen Display) menu Press "Down Arrow" to select the option "Color" then press "OK" to enter color setting, there are three settings as below. Color Temperature; With settings in the 6500K range the panel appears "warm, with a red-white color tone", while a 9300K temperature yields "cool, bluewhite toning". 2. sRGB; this is a standard setting for ensuring correct exchange of colors between different device (e. g. digital cameras, monitors, printers, scanners, etc) 3. [. . . ]